Geodesic
Parallel FDM printer
Matematičeskaâ fizika i kompʹûternoe modelirovanie, no. 4 (2016), pp. 116-131.

Voir la notice de l'article provenant de la source Math-Net.Ru

We consider the FDM 3D-printing technology in this article. All accomplishments and limitations of this technology were studied. After analyzing the 3D-printing market and examining different designs of printers working for FDM technology, we decided to upgrade 3D FDM technology. We have developed a unique design that allows it to use 4 extruders during the print. Today only one nozzle is used at any time by the FDM printing standard. There are designs that have two or more nozzles, but they print separately at different times and each of them performs certain operations. For example, printer has two nozzles and one nozzle prints primary part of the model, and the second nozzle prints supporting structures by using soluble plastic. Under parallel FDM printing (or PFDM printing) means the simultaneous use of a few extruders. This approach will ensure high printing speed proportionally to the number of working extruders. Our design uses four extruders, which must carry out simultaneous print layer. Each print area has its own extruder, but it can use an adjacent area in a small amount to achieve a smooth dense printing. In this article, we describe an algorithm, recommended for the PFDM printer G-code creation. We have created a 3D-model of the PFDM printers proposed design, which is also present in this work. If PFDM technology is successfully implemented, it will be a significant contribution to the development of both FDM and other printing methods.
Mots-clés : FDM
Keywords: PFDM, 3D-printer, 3D parallel printing, 3D-modeling, prototyping. 
@article{VVGUM_2016_4_a9,
     author = {A. V. Belousov and S. S. Khrapov and A. V. T{\cyre}n and N. V. Sadchikov and Yu. A. Boldyr{\cyre}va},
     title = {Parallel {FDM} printer},
     journal = {Matemati\v{c}eska\^a fizika i kompʹ\^uternoe modelirovanie},
     pages = {116--131},
     publisher = {mathdoc},
     number = {4},
     year = {2016},
     language = {ru},
     url = {http://geodesic.mathdoc.fr/item/VVGUM_2016_4_a9/}
}
TY  - JOUR
AU  - A. V. Belousov
AU  - S. S. Khrapov
AU  - A. V. Tеn
AU  - N. V. Sadchikov
AU  - Yu. A. Boldyrеva
TI  - Parallel FDM printer
JO  - Matematičeskaâ fizika i kompʹûternoe modelirovanie
PY  - 2016
SP  - 116
EP  - 131
IS  - 4
PB  - mathdoc
UR  - http://geodesic.mathdoc.fr/item/VVGUM_2016_4_a9/
LA  - ru
ID  - VVGUM_2016_4_a9
ER  - 
%0 Journal Article
%A A. V. Belousov
%A S. S. Khrapov
%A A. V. Tеn
%A N. V. Sadchikov
%A Yu. A. Boldyrеva
%T Parallel FDM printer
%J Matematičeskaâ fizika i kompʹûternoe modelirovanie
%D 2016
%P 116-131
%N 4
%I mathdoc
%U http://geodesic.mathdoc.fr/item/VVGUM_2016_4_a9/
%G ru
%F VVGUM_2016_4_a9
A. V. Belousov; S. S. Khrapov; A. V. Tеn; N. V. Sadchikov; Yu. A. Boldyrеva. Parallel FDM printer. Matematičeskaâ fizika i kompʹûternoe modelirovanie, no. 4 (2016), pp. 116-131. http://geodesic.mathdoc.fr/item/VVGUM_2016_4_a9/

[1] E.\;O. Agafonnikova, A.\;V. Khoperskov, S.\;S. Khrapov, “Hydrological Designing Security for a Mountainous Area in the Event of Flash Floods on the Example of the Crimean Region of Krasnodar Territory”, Upravlenie bolshimi sistemami, materialy XII Vseros. shk.-konf. molodykh uchenykh, 2015, 851–860

[2] A.\;V. Belousov, S.\;S. Khrapov, “Modeling of Gas Dynamic Flows on the Basis of the Euler–Lagrange Scheme LES–ASG”, Science Journal of Volgograd State University. Mathematics. Physics, 2015, no. 5 (30), 36–51

[3] B.\;V. Bogutskiy, S.\;M. Bratan, V.\;B. Bogutskiy, “An Analysis of Traffic Patterns in Modern FDM 3D-Printers”, Uchenye zapiski Krymskogo inzhenerno-pedagogicheskogo universiteta, 2016, no. 1 (51), 79–86

[4] E.\;V. Bochkareva, S.\;S. Khrapov, “Numerical Simulation of the Dynamics of the Sound Waves in Active Media with MUSCL Scheme”, Science Journal of Volgograd State University. Mathematics. Physics, 2015, no. 1, 13–22

[5] Internet Resource of PFDM Project, , Title from screen http://pfdmp.geomit.ru

[6] A.\;S. Grishin, O.\;V. Bredikhina, A.\;S. Pomoz, V.\;G. Ponomarev, O.\;N. Krasulya, “New Technologies in Food Industry—3D Printing”, Vestnik YuUrGU. Seriya «Pishchevye i biotekhnologii», 4:2 (2016), 36–44

[7] V.\;S. Patsko, I.\;S. Starodubtsev, A.\;A. Fedotov, “Physical Visualization of Reachable Sets in Control Problems”, GRAFIKON'2015, tr. Yubil. 25-y Mezhdunar. nauch. konf., 2015, 22–27

[8] A.\;A. Voronin, A.\;A. Vasilchenko, M.\;V. Pisareva, A.\;V. Pisarev, A.\;V. Khoperskov, S.\;S. Khrapov, Yu.\;E. Podshchipkova, “Designing a System for Ecological-Economical Management of the Volga–Akhtuba Floodplain on Basis of Hydrodynamic and Geoinformational Simulation”, Upravlenie bolshimi sistemami, 55, 2015, 79–102

[9] N.\;M. Kuzmin, A.\;V. Belousov, T.\;S. Shushkevich, S.\;S. Khrapov, “Numerical Scheme CSPH–TVD: Investigation of Influence Slope Limiters”, Science Journal of Volgograd State University. Mathematics. Physics, 2014, no. 1 (20), 22–34

[10] Blender, , Title from screen http://www.blender.org

[11] J.\;W. Comb, W.\;R. Priedeman, P.\;W. Turley, “FDM technology process improvements”, Proceedings of Solid Freeform Fabrication Symposium, 1994, 42–49

[12] M.\;I. Abdullin, A.\;A. Basyrov, S.\;N. Nikolaev, Y.\;A. Koksharova, N.\;V. Koltaev, “Defining the Conditions of ZD Printing Using Abs Plastic”, European Reviews of Chemical Research, 1:1 (2014), 4–9 | DOI

[13] I. Gajdos, J. Slota, “Influence of printing conditions on structure in FDM prototypes”, Tehnicki vjesnik–Technical Gazette, 2013, no. 2, 231–236

[14] J.\;J. Monaghan, “Smoothed particle hydrodynamics”, Annual Review of Astronomy and Astrophysics, 30 (1992), 543–574 | DOI | MR

[15] PrintBox3D, , Title from screen http://www.printbox3d.ru

[16] PrismPro, , Title from screen http://www.3dquality.ru

[17] S.\;S. Khrapov, A.\;V. Pisarev, I.\;A. Kobelev, A.\;G. Zhumaliev, E.\;O. Agafonnikova, A.\;G. Losev, A.\;V. Khoperskov, “The numerical simulation of shallow water: estimation of the roughness coefficient on the flood stage”, Advances in Mechanical Engineering, 5 (2013), 1–11