Geodesic
The steady-state creep of long membrane in a rigid matrix at a variable transverse pressure
Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences, Tome 24 (2020) no. 3, pp. 445-468.

Voir la notice de l'article provenant de la source Math-Net.Ru

The problem of the steady-state creep of a long rectangular membrane in constrained conditions inside a rigid matrix is investigated with a piecewise constant dependence of the transverse pressure $q$ on time $t$. The problem considers a long matrix of rectangular cross section, in which the ratio of its height to width is not less than 0.5. As an example, the creep of the membrane is investigated with a single change in the magnitude of the transverse pressure over time. Three variants of the contact conditions of the membrane and the matrix are considered: perfect sliding, adhesion and sliding taking friction into account. In this paper, four stages of membrane deformation were investigated. At the first stage (elastic deformation), the membrane, flat in the initial state, under the action of pressure, instantaneously is deformed elastically, acquiring the form of an open circular cylindrical shell with a central angle $2\alpha _1 $. At the second stage, the membrane is deformed under steady-state creep conditions up to the moment when the side walls of the matrix touch. The third stage ends when the membrane touches the transverse wall of the matrix. In the fourth stage, the membrane is in contact with the matrix on the transverse and lateral sides. The analysis is carried out until the time of almost complete adherence of the membrane to the matrix, at which the ratio of the radius of the membrane near the corners of the matrix to the initial width of the membrane is 0.005. For the third and fourth stages, the friction force of the membrane on the matrix walls is additionally taken into account. The dependences of the thickness of various parts of the membrane on time and on the intensity of stresses in the membrane on time are obtained. In relation to this formulation of the problem, deviations from the rule of summing the partial times of filling the matrix are considered.
Mots-clés : membrane, transverse pressure, friction.
Keywords: steady-state creep, the matrix, ideal sliding, adhesion, non-stationary loading 
@article{VSGTU_2020_24_3_a2,
     author = {A. M. Lokoshchenko and W. V. Teraud and E. A. Shevarova},
     title = {The steady-state creep of long membrane in a rigid matrix at a variable transverse pressure},
     journal = {Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences},
     pages = {445--468},
     publisher = {mathdoc},
     volume = {24},
     number = {3},
     year = {2020},
     language = {ru},
     url = {http://geodesic.mathdoc.fr/item/VSGTU_2020_24_3_a2/}
}
TY  - JOUR
AU  - A. M. Lokoshchenko
AU  - W. V. Teraud
AU  - E. A. Shevarova
TI  - The steady-state creep of long membrane in a rigid matrix at a variable transverse pressure
JO  - Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences
PY  - 2020
SP  - 445
EP  - 468
VL  - 24
IS  - 3
PB  - mathdoc
UR  - http://geodesic.mathdoc.fr/item/VSGTU_2020_24_3_a2/
LA  - ru
ID  - VSGTU_2020_24_3_a2
ER  - 
%0 Journal Article
%A A. M. Lokoshchenko
%A W. V. Teraud
%A E. A. Shevarova
%T The steady-state creep of long membrane in a rigid matrix at a variable transverse pressure
%J Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences
%D 2020
%P 445-468
%V 24
%N 3
%I mathdoc
%U http://geodesic.mathdoc.fr/item/VSGTU_2020_24_3_a2/
%G ru
%F VSGTU_2020_24_3_a2
A. M. Lokoshchenko; W. V. Teraud; E. A. Shevarova. The steady-state creep of long membrane in a rigid matrix at a variable transverse pressure. Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences, Tome 24 (2020) no. 3, pp. 445-468. http://geodesic.mathdoc.fr/item/VSGTU_2020_24_3_a2/

[1] Odqvist F. K. G., Mathematical Theory of Creep and Creep Rupture, Clarendon Press, Oxford, 1966, ix+168 pp. | MR | Zbl

[2] Kachanov L. M., Osnovy mekhaniki razrusheniia [Fundamentals of Fracture Mechanics], Nauka, Moscow, 1974, 312 pp. (In Russian)

[3] Malinin N. N., Polzuchest' v obrabotke metallov [Creep in metal forming], Mashinostroenie, Moscow, 1986, 216 pp. (In Russian)

[4] Lokoshchenko A. M., Creep and long-term strength of metals, CRC Press, 2018, xviii+545 pp. | DOI

[5] Lokoshchenko A. M., Teraud V. V., “Creep of a long narrow membrane up to fracture under constrained conditions”, J. Appl. Mech. Tech. Phys., 54:3 (2013), 451–457 | DOI | Zbl

[6] Demin V. A., Lokoshchenko A. M., Zherebtsov A. A., “Creep of a long rectangular membrane in a curvilinear matrix”, Izv. Vuzov. Mashinostroenie, 1998, no. 4–6, 41–46 (In Russian)

[7] Shesterikov S. A., Yumasheva M. A., “Concretization of the equation of state in the creep theory”, Izv. AN SSSR. MTT [Mech. Solids], 1984, no. 1, 86–91 (In Russian)

[8] Lokoshchenko A. M., Abrosimova E. A., “Steady-state creep of a long membrane in a rigid matrix with a piecewise constant dependence of the rate of change in transverse pressure on time”, J. Appl. Mech. Tech. Phys., 60:1 (2019), 87–96 | DOI | DOI | MR | Zbl

[9] Robinson E. L., “Effect of temperature variation on the long time rupture strength of steels”, Trans. Am. Soc. Mech. Engrs, 74:5 (1952), 777–780

[10] Gulyaev V. N., Kolesnichenko M. G., “On the evaluation of service life during the creep process with the load applied in stages”, Industrial Laboratory, 29:6 (1963), 799–802

[11] Marriott D. L., Penny R. K., “Strain accumulation and rupture during creep under variable uniaxial tensile loading1”, J. Strain Analysis, 8:3 (1973), 151–159 | DOI

[12] Osasyuk V. V., Olisov A. N., “Hypotheses for summing relative endurances”, Strength Mater., 11:11 (1979), 1229–1232 | DOI