Mixed-mode loading of the structural elements with defect

L. V. Stepanova ; E. M. Yakovleva

Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences, Tome 19 (2015) no. 2, pp. 358-381.

Résumé

In the article the problem of determining the stress-strain state near the mixed-mode crack tip in a power-law material under plane stress conditions is considered. The eigenfunction method is used for the mixed-mode crack tip problem. It is shown that the eigenfunction expansion method results in the nonlinear eigenvalue problem. The numeric solution of the nonlinear eigenvalue problem formulated is obtained. The power of the distance from the crack tip is the eigenvalue of the nonlinear eigenvalue problem considered whereas the angular distributions of the stress components are the eigenfunctions. The new eigenvalues different from the eigenvalues of the Hutchinson–Rice–Rosengren are found. It is shown that the new asymptotic solution can be interpreted as the self-similar intermediate asymptotics of the stress field in the vicinity of the crack tip at distances which are very small compared to the crack length or the size of the specimen and at distances which are large compared to the length of the completely damaged zone. The developed method allows us to construct the geometry of the completely damaged zone in vicinity of the crack tip.

Détail

Keywords: nonlinear eigenvalue problem, stress-strain state near the crack tip, mixed-mode loading, mixity parameter
Mots-clés : perturbation technique.

Bibliographie

[1] Stepanova L. V., Yakovleva E. M., “Mixed-mode loading of the structural elements with defect”, The 4nd International Conference “Mathematical Physics and its Applications”, Book of Abstracts and Conference Materials, eds. I. V. Volovich; V. P. Radchenko, Samara State Technical Univ., Samara, 2014 (In Russian)

[2] Bui H. D., Fracture Mechanics. Inverse Problems and Solutions, Solid Mechanics and Its Applications, 139, Springer, Netherlands, 2006, xxviii+382 pp. | DOI | Zbl

[3] Li J., Recho N., Méthodes asymptotiques en mécanique de la rupture, Hermes Science Publications, Paris, 2002, 262 pp.

[4] Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures, ed. G. Z. Voyiadjis, Springer, New York, 2015, xxviii+1591 pp. | DOI

[5] François D., Pineau A., Zaoui A., Mechanical Behaviour of Materials. Vol. 1: Micro- and Macroscopic Constitutive Behaviour, Solid Mechanics and Its Applications, 180, Springer, Netherlands, 2013, xvii+662 pp. | DOI | MR

[6] Sih G. C., “Crack tip mechanics based on progressive damage of arrow: Hierarchy of singularities and multiscale segment”, Theoretical and Applied Fracture Mechanics, 51:1 (2009), 11–32 | DOI

[7] Sih G. C., Tang X. S., “Simultaneity of multiscaling for macro-meso-micro damage model represented by strong singularities”, Theoretical and Applied Fracture Mechanics, 42:3 (2004), 199–225 | DOI

[8] Sih G. C., Tang X. S., “Weak and strong singularities reflecting multiscale damage: micro-boundary conditions for free-free, fixed–fixed and free-fixed constraints”, Theoretical and Applied Fracture Mechanics, 43:1 (2005), 5–62 | DOI

[9] Argatov I. I., Vvedenie v asimptoticheskoe modelirovanie v mekhanike [Introduction to Asymptotic Modelling in Mechanics], Politekhnika, Saint Petersburg, 2004, 302 pp. (In Russian)

[10] Stepanova L. V., Matematicheskie metody mekhaniki razrusheniia [Mathematical Methods of Fracture Mechanics], Samara Univ., Samara, 2006, 232 pp. (In Russian)

[11] Williams M. L., “Stress singularities resulting from various boundary conditions in angular corners of plates in extensions”, Journal of Applied Mechanics, 19 (1952), 526–534

[12] Williams M. L., “On the stress distribution at the base of a stationary crack”, Journal of Applied Mechanics, 24 (1957), 109–114 | MR | Zbl

[13] Beliakova T. A., “The eigenspectrum approach and T-stress at the mixed-mode crack tip for a stress-state dependent material”, Procedia Materials Sience, 3 (2014), 147–152 | DOI

[14] Hutchinson J. W., “Singular behaviour at the end of a tensile crack in a hardening material”, Journal of the Mechanics and Physics of Solids, 16:1 (1968), 13–31 | DOI | Zbl

[15] Hutchinson J. W., “Plastic stress and strain fields at a crack tip”, Journal of the Mechanics and Physics of Solids, 16:5 (1968), 337–347 | DOI

[16] Rice J. R., Rosengren G. F., “Plane strain deformation near a crack tip in a power-law harderning material”, Journal of the Mechanics and Physics of Solids, 16:1 (1968), 1–12 | DOI | Zbl

[17] Zehnder A., Fracture Mechanics, Lecture Notes in Applied and Computational Mechanics, 62, Springer, Netherlands, 2012, xiv+226 pp. | DOI | MR

[18] Multiscale Fatigue Crack Initiation and Propagation of Engineering Materials: Structural Integrity and Microstructural Worthiness, Solid Mechanics and its Applications, 152, eds. G. C. Sih, Springer, Netherlands, 2008, xiii+380 pp. | DOI | Zbl

[19] Adulina E. M., Igonin S. A., Stepanova L. V., “About a non-linear task on eigenvalues incurring from the analysis of tensions at the fatigue crack tip”, Vestnik SamGU. Estestvenno-Nauchnaya Ser., 2012, no. 3/1(94), 83–102 (In Russian)

[20] Failure and Damage Analises of Advanced Materials, CISM International Centre for Mechanical Sciences, 560, eds. H. Altenbach, T. Sadowski, Springer, Vienna, 2015, xii+282 pp. | DOI

[21] Hello G., Taha M. B., Roelandt J. M., “Analytical determination of coefficients in crack-tip stress expansions for a finite crack in an infinite plane medium”, International Journal of Solids and Structures, 49:3–4 (2012), 556–566 | DOI

[22] Shih C. F., Elastic-plastic analysis of combined mode crack problems, PhD Thesis, Harvard University, 1973

[23] Shih C. F., “Small-scale yielding analysis of mixed mode plane-strain crack problems”, National Symposium on Fracture Mechanics, STP560 (1974), 187–210 | DOI

[24] Stepanova L. V., Adylina E. M., “Asymptotic methods of nonlinear fracture mechanics: results, contemporary state and perspectives”, Vestn. Samar. Gos. Tekhn. Univ. Ser. Fiz.-Mat. Nauki [J. Samara State Tech. Univ., Ser. Phys. Math. Sci.], 2013, no. 2(31), 156–168 (In Russian) | DOI

[25] Shlyannikov V. N., Tumanov A. V., “Elastic mode mixity parameters for semi-elliptical crack under biaxial loading”, Izv. Saratov Univ. (N.S.), Ser. Math. Mech. Inform., 10:2 (2010), 73–80 (In Russian)

[26] Shlyannikov V. N., Kislova S. Yu., “Mode mixity parameters for mathematical crack type”, Izv. Saratov Univ. (N.S.), Ser. Math. Mech. Inform., 9:1 (2009), 77–84 (In Russian)

[27] Fatigue, Failure, and Damage Evolution, Proceedings of the 2014 Annual Conference on Experimental and Applied Mechanics, v. 5, eds. J. Carroll, S. Daly, Springer, New York, 2015, viii+252 pp. | DOI

[28] Rahman S., Mohammad E., “Effects of mixed-mode overloading on the mixed-mode I+II fatigue crack growth”, Archive of Applied Mechanics, 83:7 (2013), 987–1000 | DOI | Zbl

[29] Stepanova L. V., “Eigenvalues of the antiplane-shear crack problem for a power-law material”, Journal of Applied Mechanics and Technical Physics, 49:1 (2008), 142–147 | DOI | Zbl

[30] Stepanova L. V., “Eigenvalue analysis for a crack in a power-law material”, Comput. Math. Math. Phys., 49:8 (2009), 1332–1347 | DOI | MR | Zbl

[31] Stepanova L. V., “Refined study of stress-strain state near the crack tip under cyclic loading in a damaged medium”, Vestnik SamGU. Estestvenno-Nauchnaya Ser., 2011, no. 2(83), 105–115 (In Russian)

[32] Rice J. R., “Mathematical analysis in mechanics of fracture”, Fracture: An Advanced Treatise, v. 2, Mathematical Fundamentals, ed. H. Liebowitz, Academic Press, New York, 1968, 191–311 http://esag.harvard.edu/rice/018_Rice_MathAnalMechFract_68.pdf

[33] Stepanova L. V., Yakovleva E. M., “Mixed-mode loading of the cracked plate under plane stress conditions”, PNRPU Mechanics Bulletin, 2014, no. 3, 129–162 (In Russian) | DOI

[34] Kachanov L. M., Osnovy teorii polzuchesti [Fundamentals of the theory of creep], Nauka, Moscow, 1969, 420 pp. (In Russian)