Geodesic
Investigation of the kinetics of physical and mechanical properties
Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences, no. 1 (2012), pp. 123-132.

Voir la notice de l'article provenant de la source Math-Net.Ru

The kinetics of residual stresses and physical and mechanical properties of the hardened air shot-blasting layer of smooth specimens and specimens with semicircular cuts of aluminum D16T and B95 alloys as a result of time-temperature expositions and multicycle fatigue tests is investigated. This research was done for symmetric loading cycle in terms of bending and tension-compression tests and the base of $10^7$ cycles. The growth of increment of the endurance limit of hardened parts with stress concentrators in comparison with non-reinforced specimens is established experimentally and by calculation. It is shown that the time-temperature exposition causes the relaxation of residual stresses and the reduction of increment of the endurance limit. In fact, surface plastic hardening significantly affects the growth of microhardness in comparison with samples unhardened. Microhardness decreases to values corresponding to unhardened sample after time-temperature expositions. The surface hardening increases the roughness layer and further time-temperature exposition and fatigue tests have no effect on these parameters. There is agreement between the calculated and experimental data.
Keywords: surface hardening, cylindrical sample, semicircular cut, residual stresses, limit of resistance fatigue, time-temperature exposition, microhardness, roughness, strain. 
@article{VSGTU_2012_1_a11,
     author = {V. P. Radchenko and V. V. Lunin and A. P. Morozov},
     title = {Investigation of the kinetics of physical and mechanical properties},
     journal = {Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences},
     pages = {123--132},
     publisher = {mathdoc},
     number = {1},
     year = {2012},
     language = {ru},
     url = {http://geodesic.mathdoc.fr/item/VSGTU_2012_1_a11/}
}
TY  - JOUR
AU  - V. P. Radchenko
AU  - V. V. Lunin
AU  - A. P. Morozov
TI  - Investigation of the kinetics of physical and mechanical properties
JO  - Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences
PY  - 2012
SP  - 123
EP  - 132
IS  - 1
PB  - mathdoc
UR  - http://geodesic.mathdoc.fr/item/VSGTU_2012_1_a11/
LA  - ru
ID  - VSGTU_2012_1_a11
ER  - 
%0 Journal Article
%A V. P. Radchenko
%A V. V. Lunin
%A A. P. Morozov
%T Investigation of the kinetics of physical and mechanical properties
%J Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences
%D 2012
%P 123-132
%N 1
%I mathdoc
%U http://geodesic.mathdoc.fr/item/VSGTU_2012_1_a11/
%G ru
%F VSGTU_2012_1_a11
V. P. Radchenko; V. V. Lunin; A. P. Morozov. Investigation of the kinetics of physical and mechanical properties. Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences, no. 1 (2012), pp. 123-132. http://geodesic.mathdoc.fr/item/VSGTU_2012_1_a11/

[1] Sulima A. M., Shulov V. A., Yagodnin R. D., Surface Layer and Service Properties of Machine Parts, Mashinostroenie, Moscow, 1988, 240 pp.

[2] Sulima A. M., Evstigneev M. I., Surface-Layer Quality and Fatigue Strength of Parts of Heat-Resistant and Titanium Alloys, Mashinostroenie, Moscow, 1974, 250 pp.

[3] Birger I. A., Residual Stresses, Mashgiz, Moscow, 1963, 232 pp.

[4] Ivanov S. I. Pavlov V. F., “The effect of residual stresses and cold working on fatigue strength”, Strength of Materials, 8:5, 529–531 | DOI

[5] Pavlov V. F., “The relation between residual stress and fatigue limit in case of bending in conditions of stress concentration”, Izv. vuzov. Mashinostroenie, 1986, no. 8, 29–32

[6] Ivanov S. I., Shatunov M. P., Pavlov V. F., “Effect of residual stresses on the fatigue of noth specimens”, Problems of aircraft structure element strength. Issue 1, KuAI, Kuibyshev, 1974, 88–95

[7] Pavlov V. F., Kirpichyov V. A., Ivanov V. B., Residual stresses and fatigue resistance of strengthened details with stress concentrators, SNC RAN, Samara, 2008, 64 pp. | Zbl

[8] Kravchenko B. A., Krutsilo V. G., Gutman G. N., Thermoplastic hardening as a reserve increase of strength and reliability of machine parts, SamGTU, Samara, 2000, 216 pp.

[9] Radchenko V. P., Kirpichev V. A., Lunin V. V., “Influence of air shot blasting and temperature exposure on residual stresses and fatigue strength of notched specimens from alloys V95 and D16T”, Vestn. Samar. Gos. Tekhn. Univ. Ser. Fiz.-Mat. Nauki, 2011, no. 3(24), 181–184 | DOI

[10] Kirpichev V. A., Bukatyi A. S., “Air shot-blasting effect on residual stress, microhardness, and resistance to fatigue”, Physics of Strength and Plasticity of Materials, v. 1, SamGTU, Samara, 2009, 109–111

[11] Radchenko V. P., Morozov A. P., Bukatyi A. S., “Multicycle fatigue tests effect on the physical and mechanical state of the hardened layer of flat samples”, Vestn. Samar. Gos. Tekhn. Univ. Ser. Teckhn. Nauki, 2009, no. 3(25), 158–165 | MR

[12] Radchenko V. P., Morozov A. P., “Experimental study of the effect induced by air shot-blasting processing, thermal exposition and high cycle fatigue tests on physical and mechanical condition hardening layer of cylindrical aamples of alloys V95 and D16T”, Vestn. Samar. Gos. Tekhn. Univ. Ser. Fiz.-Mat. Nauki, 2010, no. 5(21), 222–228 | DOI | MR

[13] Ivanov S. I., “Determination of residual stresses in a cylinder by the ring and band method”, Residual Stresses. Issue 53, KuAI, Kuibyshev, 1971, 32–42