Influence of laser and laser-ultrasonic treatments on the durability varying of steel friction surfaces

G. D. Gureev ; D. M. Gureev

Journal of Samara State Technical University, Ser. Physical and Mathematical Sciences, no. 2 (2007), pp. 138-144.

Résumé

The damage of the sliding friction surfaces of constructional steel 40Kh over the stainless steel 12Kh18N10T is researched. From the comparison of the damage processes for steel 40Kh in its initial annealed state, after the laser and laser-ultrasonic hardening to the different values of surface micro-hardness and separately after the volume heat treatment it’s established that in the whole interval of micro-hardness values not related to the dispersion degree of structures the damage is of fatigue nature. The trend of durability increasing and damage rate decreasing is discovered under the escalation of friction surface micro-hardness. The empirical analytic relations are obtained from the analysis of experimental data. These relations tie the damage parameters with the micro-hardness characteristics of surface. It is shown that the damage process comes with forming the special structural-stressed state in Saint–Venant area, which is characterized with the constant level of hardness not related to the previous material status.

Bibliographie

[1] Biryukov V. P., “Lazernaya zakalka poverkhnostei treniya serogo chuguna skaniruyuschim luchom”, Trenie i iznos, 7:4 (1986), 718–721

[2] Dubnyakov V. N., “Vliyanie predshestvuyuschei obrabotki na plastichnost i abrazivnuyu iznosostoikost metastabilnykh sloev”, Trenie i iznos, 6:5 (1985), 827–834

[3] V. N. Dubnyakov, S. P. Kozyrev, I. L. Pimkov, “Povyshenie iznosostoikosti truschikhsya poverkhnostei detalei lazernym uprochneniem”, Trenie i iznos, 5:4 (1984), 713–714

[4] A. G. Suslov, Yu. V. Kolesnikov, V. P. Inyutin, “Issledovanie vozmozhnostei povysheniya dinamicheskoi poverkhnostnoi prochnosti stalei s pomoschyu lazernogo legirovaniya”, Trenie i iznos, 6:5 (1985), 872–877

[5] Alisin V. V., Biryukov V. P., “Opredelenie parametrov uprochneniya zon pri zakalke skaniruyuschim lazernym luchom”, Trenie i iznos, 9:6 (1988), 1027–1031

[6] N. M. Mikhin, L. N. Obischenko, G. I. Kozlov i dr., “Issledovanie vliyaniya lazernogo izlucheniya na fiziko-mekhanicheskie kharakteristiki poverkhnostnykh sloev detalei i ikh iznosostoikost pri abrazivnom iznashivanii”, Trenie i iznos, 4:4 (1983), 648–653

[7] L. G. Korshunov, A. V. Makarov, A. L. Osintseva, “Issledovanie iznosostoikosti i strukturnykh prevraschenii pri abrazivnom iznashivanii stali U8, uprochnennoi lazerom”, Trenie i iznos, 9:1 (1988), 52–59

[8] G. I. Kozlov, L. N. Obischenko, N. M. Mukhin i dr., “Issledovanie vliyaniya lazernogo uprochneniya v rezhime glubinnogo proplavleniya na fiziko-mekhanicheskie kharakteristiki poverkhnostnykh sloev stalnykh detalei i ikh iznosostoikost pri abrazivnom iznashivanii”, Trenie i iznos, 5:2 (1984), 251–257

[9] A. Yu. Ishlinskii, I. V. Krachelskii, N. M. Alekseev i dr., “Problemy iznashivaniya tverdykh tel v aspekte mekhaniki”, Trenie i iznos, 7:4 (1986), 581–592

[10] Krachelskii I. V., Trenie i iznos, Mashinostroenie, M., 1968

[11] Kostetskii B. I., Poverkhnostnaya prochnost materialov pri trenii, Tekhnika, Kiev, 1976

[12] N. M. Alekseev, R. I. Bogdanov, N. A. Bushe i dr., “Novoe o strukturnykh osobennostyakh treniya tverdykh tel”, Trenie i iznos, 9:6 (1988), 965–973

[13] Alekseev N. M., “Novoe o strukturnykh osobennostyakh iznashivaniya tverdykh tel”, Trenie i iznos, 10:2 (1989), 197–205

[14] Polyakov A. A., “Priroda i granitsy primeneniya izbiratelnogo perenosa”, Trenie i iznos, 9:3 (1988), 473–480

[15] N. M. Alekseev, N. A. Bushe, “Nekotorye aspekty sovmestimosti materialov pri trenii. I. Podpoverkhnostnye protsessy”, Trenie i iznos, 6:5 (1985), 773–783

[16] B. I. Kostetskii, M. E. Natanson, L. I. Bershadskii, Mekhanicheskie protsessy pri granichnom trenii, Nauka, M., 1972

[17] N. M. Alekseev, I. V. Krachelskii, A. M. Shapiro, Osobennosti plasticheskogo techeniya metallov pri trenii i ikh vliyanie na protsessy treniya i iznashivaniya, Trenie i iznos, 4, no. 3, 1983