Geodesic
Influence of deposition conditions on the structure and mechanical properties of a-C coatings
Problemy fiziki, matematiki i tehniki, no. 4 (2024), pp. 7-12.

Voir la notice de l'article provenant de la source Math-Net.Ru

Amorphous carbon coatings were formed by the pulsed cathode-arc evaporation method. The dependences of the deposition rate of the phase composition, RMS roughness , and mechanical properties of the coatings on the orientation of the substrate relative to the carbon plasma flow were determined. It was shown that the deposition parameters and coating properties change non-monotonically with increasing angle of incidence of the flow on the substrate. The аnalysis of the AFM data showed the dependence of the RMS roughness of the coatings on the angle of incidence of the flow. The highest content of the sp$^3$-phase, hardness, and elastic modulus are achieved at an angle of incidence of 15$^\circ$.
Keywords: carbon coatings, deposition, morphology, mechanical properties.
Mots-clés : structure 
@article{PFMT_2024_4_a0,
     author = {Jingjie Wang and D. G. Piliptsov and A. V. Rogachev and A. S. Rudenkov and K. A. Sakhovsky and S. Yu. Chepkasov},
     title = {Influence of deposition conditions on the structure and mechanical properties of {a-C} coatings},
     journal = {Problemy fiziki, matematiki i tehniki},
     pages = {7--12},
     publisher = {mathdoc},
     number = {4},
     year = {2024},
     language = {ru},
     url = {http://geodesic.mathdoc.fr/item/PFMT_2024_4_a0/}
}
TY  - JOUR
AU  - Jingjie Wang
AU  - D. G. Piliptsov
AU  - A. V. Rogachev
AU  - A. S. Rudenkov
AU  - K. A. Sakhovsky
AU  - S. Yu. Chepkasov
TI  - Influence of deposition conditions on the structure and mechanical properties of a-C coatings
JO  - Problemy fiziki, matematiki i tehniki
PY  - 2024
SP  - 7
EP  - 12
IS  - 4
PB  - mathdoc
UR  - http://geodesic.mathdoc.fr/item/PFMT_2024_4_a0/
LA  - ru
ID  - PFMT_2024_4_a0
ER  - 
%0 Journal Article
%A Jingjie Wang
%A D. G. Piliptsov
%A A. V. Rogachev
%A A. S. Rudenkov
%A K. A. Sakhovsky
%A S. Yu. Chepkasov
%T Influence of deposition conditions on the structure and mechanical properties of a-C coatings
%J Problemy fiziki, matematiki i tehniki
%D 2024
%P 7-12
%N 4
%I mathdoc
%U http://geodesic.mathdoc.fr/item/PFMT_2024_4_a0/
%G ru
%F PFMT_2024_4_a0
Jingjie Wang; D. G. Piliptsov; A. V. Rogachev; A. S. Rudenkov; K. A. Sakhovsky; S. Yu. Chepkasov. Influence of deposition conditions on the structure and mechanical properties of a-C coatings. Problemy fiziki, matematiki i tehniki, no. 4 (2024), pp. 7-12. http://geodesic.mathdoc.fr/item/PFMT_2024_4_a0/

[1] S. Chepkasov et al., “Properties of ta-C coatings prepared by pulsed cathodic arc source at various distances”, J. Phys.: Conf. Ser., 1115:3 (2018), 032066

[2] S. Chepkasov et al., “The Effect of the Substrate Spatial Orientation on The Properties of Amorphous Carbon Coatings Deposited from Pulse Plasma Flows”, 2020 7th International Congress on Energy Fluxes and Radiation Effects (EFRE) (Tomsk, Russia, 14-26 september 2020), Institute of High Current Electronics, Tomsk, 2020, 856–862

[3] B. Schultrich, “Structure and Characterization of Vacuum Arc Deposited Carbon Films - A Critical Overview”, Coating, 12 (2022), 109-1–109-33

[4] P. Wongpanya, P. Silawong, P. Photongkam, “Nanomechanical properties and thermal stability of Al-N-co-doped DLC films prepared by filtered cathodic vacuum arc deposition”, Surface and Coatings Technology, 424 (2021), 127655

[5] Chzhou Bin i dr., “Razmernye effekty v bisloinykh pokrytiyakh titan-uglerod. 2. Zavisimost struktury i svoistv ot tolschiny uglerodnogo sloya”, Problemy fiziki, matematiki i tekhniki, 2014, no. 1 (18), 16-20

[6] W.C. Oliver, G.M. Pharr, “An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments”, Journal of Materials Research, 7:6 (1992), 1564-1583 | DOI

[7] ISO 14577-2:2015. - Part 2: Metallic materials. Instrumented indentation test for hardness and materials parameters. Verification and calibration of testing machines

[8] A. Leyland, A. Matthews, “On the significance of the H / E ratio in wear control: a nanocomposite coating approach to optimised tribological behavior”, Wear, 246:1-2 (2000), 1-11 | DOI

[9] A.C. Ferrari, J. Robertson, “Interpretation of Raman spectra of disordered and amorphous carbon”, Phys. Rev., 61 (2000), 14095 | DOI

[10] C. Casiraghi, A.C. Ferrari, J. Robertson, “Raman spectroscopy of hydrogenated amorphous carbons”, Phys. Rev., 72:8 (2005), 085401 | DOI

[11] T.B. Ma, Y.Z. Hu, H. Wang, X. Li, “Microstructural and stress properties of ultrathin diamondlike carbon films during growth”, Phys. Rev., 75:3 (2007), 035425 | DOI

[12] J. Robertson, “Diamond-like amorphous carbon”, Mater. Sci. Eng. R, 37 (2002), 129-281 | DOI

[13] Y. Lifshitz, S.R. Kasi, J.W. Rabalais, W. Eckstein, “Subplantation model for film growth from hyperthermal species”, Physical Review, 41:15 (1990), 10468 | DOI

[14] J. Robertson, “Deposition mechanisms for promoting sp$^3$ bonding in diamond-like carbon”, Diamond and Related Materials, 2:5-7 (1993), 984-989 | DOI

[15] B. Schultrich, “Modeling of ta-C growth: influence of the technological parameters”, Diam. Relat. Mater., 20:5-6 (2011), 758-792

[16] W. Dai, X. Li, L. Wu, Q. Wang, “Influences of target power and pulse width on the growth of diamond-like/graphite-like carbon coatings deposited by high power impulse magnetron sputtering”, Diam. Relat. Mater., 111 (2021), 108232 | DOI

[17] W. Ni, Y.T. Cheng, A.M. Weiner, T.A. Perry, “Tribological behavior of diamond-like carbon (DLC) coatings against aluminum alloys at elevated temperatures”, Surf. Coat. Technol., 201:6 (2006), 3229-3234 | DOI