Geodesic
Determination of parameters for controlled laser cleaving of silicate glasses using regression, neural network and fuzzy models
Problemy fiziki, matematiki i tehniki, no. 2 (2024), pp. 32-38.

Voir la notice de l'article provenant de la source Math-Net.Ru

This study proposes a solution to the applied research problem of predicting the characteristics of laser cleaving of silicate glasses. The results of a numerical experiment conducted in APDL (Ansys Parametric Design Language) were used to build regression, neural network and fuzzy models for the controlled laser cleaving of silicate glasses. The processing speed, radius, and power of the laser beam were considered as variable factors, whereas the maximum temperature and thermoelastic tensile stresses in the laser-treated area were regarded as responses. The regression model for the responses of laser cutting of glass plates at a specified significance level was estimated using the findings from the face-centered version of the central composite design experiment. Artificial neural networks that exhibit response dependence on input factors were created and trained. The most effective neural network models of the maximum temperature and thermoelastic tensile stresses in the laser-treated area were determined using MAPE (mean absolute percentage error) heat maps. Fuzzy modeling of controlled laser cleaving of silicate glasses was conducted according to the developed linguistic variables of input and output parameters. An evaluation was performed to compare the results of regression, neural network, and fuzzy modelling based on accuracy criteria, ultimately identifying the most effective model. The research findings can be suggested for practical application in approximating the maximum temperature and thermoelastic tensile stress in the laser-treated area.
Keywords: laser cutting, fuzzy logic, artificial neural network, ANSYS – Universal Finite Element Analysis Software System. 
@article{PFMT_2024_2_a5,
     author = {Yu. V. Nikitjuk and A. F. Vasilyev and L. N. Marchenko and J. Ma and L. Wang and Y. Qin and I. Yu. Aushev},
     title = {Determination of parameters for controlled laser cleaving of silicate glasses using regression, neural network and fuzzy models},
     journal = {Problemy fiziki, matematiki i tehniki},
     pages = {32--38},
     publisher = {mathdoc},
     number = {2},
     year = {2024},
     language = {en},
     url = {http://geodesic.mathdoc.fr/item/PFMT_2024_2_a5/}
}
TY  - JOUR
AU  - Yu. V. Nikitjuk
AU  - A. F. Vasilyev
AU  - L. N. Marchenko
AU  - J. Ma
AU  - L. Wang
AU  - Y. Qin
AU  - I. Yu. Aushev
TI  - Determination of parameters for controlled laser cleaving of silicate glasses using regression, neural network and fuzzy models
JO  - Problemy fiziki, matematiki i tehniki
PY  - 2024
SP  - 32
EP  - 38
IS  - 2
PB  - mathdoc
UR  - http://geodesic.mathdoc.fr/item/PFMT_2024_2_a5/
LA  - en
ID  - PFMT_2024_2_a5
ER  - 
%0 Journal Article
%A Yu. V. Nikitjuk
%A A. F. Vasilyev
%A L. N. Marchenko
%A J. Ma
%A L. Wang
%A Y. Qin
%A I. Yu. Aushev
%T Determination of parameters for controlled laser cleaving of silicate glasses using regression, neural network and fuzzy models
%J Problemy fiziki, matematiki i tehniki
%D 2024
%P 32-38
%N 2
%I mathdoc
%U http://geodesic.mathdoc.fr/item/PFMT_2024_2_a5/
%G en
%F PFMT_2024_2_a5
Yu. V. Nikitjuk; A. F. Vasilyev; L. N. Marchenko; J. Ma; L. Wang; Y. Qin; I. Yu. Aushev. Determination of parameters for controlled laser cleaving of silicate glasses using regression, neural network and fuzzy models. Problemy fiziki, matematiki i tehniki, no. 2 (2024), pp. 32-38. http://geodesic.mathdoc.fr/item/PFMT_2024_2_a5/

[1] R.M. Lumley, “Controlled separation of brittle materials using a laser”, Am. Ceram. Soc. Bull., 48 (1969), 850–854

[2] G.A. Machulka, Laser processing of glass, Sov. radio, M., 1979, 136 pp. (In Russian)

[3] S. Nisar, “Laser glass cutting techniques - A review”, Journal of laser applications, 25:4 (2013), 042010, 11 pp. | DOI

[4] V.S. Kondratenko, S.A. Kudzh, “Precision Cutting of Glass and Other Brittle Materials by Laser-Controlled Thermo-Splitting (Review)”, Glass Ceram., 74 (2017), 75–81 | DOI

[5] Yu.V. Nikityuk, Physical regularities of laser thermal cleaving of silicate glasses and alumina ceramics, specialty 01.04.21 “Laser physics”, PhD thesis extended abstract, Minsk, 2009, 24 pp. (in Russian)

[6] V.A. Golovko, V.V. Krasnoproshin, Neural network data processing technologies, textbook, BSU, Minsk, 2017, 263 pp. (in Russian)

[7] F. Chollet, Deep Learning with Python, Manning Publications Co., 2018, 400 pp.

[8] A.N. Bakhtiyari, Z. Wang, L. Wang, H. Zheng, “A review on applications of artificial intelligence in modeling and optimization of laser beam machining”, Optics Laser Technology, 135 (2021), 1–18

[9] M.B. Kadri, S. Nisar, S.Z. Khan, W.A. Khan, “Comparison of ANN and finite element model for the prediction of thermal stresses in diode laser cutting of float glass”, Optik - Int. J. Light Electron Optics, 126:19 (2015), 1959–1964 | DOI

[10] Yu.V. Nikityuuk, A.N. Serdyukov, I.Yu. Aushev, “Determination of the parameters of two-beam laser splitting of silicate glasses using regression and neural network models”, Journal of the Belarusian State University. Physics, 1 (2022), 35–43 | DOI

[11] Yu.V. Nikityuuk, A.N. Serdyukov, V.A. Prokhorenko, I.Yu. Aushev, “Application of artificial neural networks and finite element method for determining parameters of quartz sol-gel glass processing by elliptical laser beams”, Problems of Physics, Mathematics and Technics, 2021, no. 3 (48), 30–36 (in Russian) | DOI

[12] Y.V. Nikityuk, A.N. Serdyukov, I.Yu. Aushev, “Optimization of two-beam laser cleavage of silicate glass”, Journal of Optical Technology, 89:2 (2022), 121–125 | DOI

[13] Yu.V. Nikityuk, A.N. Serdyukov, I.Yu. Aushev, “Optimization of laser splitting parameters of silicate glasses with elliptical beams in the plane of parallel surface”, Vestnik of the Sukhoi State Technical University of Gomel, 2023, no. 3, 17–27

[14] Yu.V. Nikityuk, I.Yu. Aushev, “Optimization of laser cleaving of silicate glasses with elliptical beams using fracture mechanics parameters”, Problems of Physics, Mathematics and Technics, 2023, no. 4 (57), 36–41

[15] Yu.V. Nikityuk, A.N. Serdyukov, “Determination of the Parameters of Controlled Laser Thermal Cleavage of Crystalline Silicon Using Regression and Neural Network Models”, Crystallography Reports, 68:7 (2023), 195–200

[16] Yu.V. Nikityuk, A.A. Sereda, A.N. Serdyukov, S.V. Shalupaev, I.Yu. Aushev, “Parametric optimization of silicate-glassbased asymmetric two-beam laser splitting”, Journal of Optical Technology, 90:6 (2023), 296–301 | DOI

[17] Yu.V. Nikityuk, A.N. Serdyukov, I.Yu. Aushev, “Optimization of laser cleaving of silicate glasses by elliptical beams under additional influence of hot air flow”, Proceedings of F. Skorina Gomel State University, 2023, no. 6 (141), 110–116 (in Russian)

[18] Yu.V. Nikityuk, A.N. Serdyukov, J. Ma, L. Wang, I.Y. Aushev, “Optimisation of parameters for laser cleaving of silicate glasses using U-shaped beams”, Vestnik of the Sukhoi State Technical University of Gomel, 2023, no. 4, 30–39

[19] A.E. Gvozdev, I.V. Golyshev, I.V. Minaev, N.N. Sergeev, I.V. Tikhonova, D.M. Khonelidze, A.G. Kolmakov, “Multiparametric optimization of laser cutting of steel sheets”, Inorganic Materials: Applied Research, 6:4 (2015), 305–310 | DOI

[20] M. Madic, M. Radovanovic, “Comparative modeling of CO$_2$ laser cutting using multiple regression analysis and artificial neural network”, International Journal of Physical Sciences, 7:16 (2012), 2422–2430

[21] S.G. Emelyanov, V.S. Titov, M.V. Bobyr, Automated fuzzy-logical control systems, Monograph, INFRA-M, M., 2011, 176 pp.

[22] G. Klir, B. Yuan, Fuzzy sets and fuzzy logic, Prentice hall, New Jersey, 1995, 574 pp. | MR | Zbl

[23] D. Rutkovskaya, M. Pilinski, L. Rutkovsky, Neural networks, genetic algorithms and fuzzy systems, Goryachaya Liniya-Telecom, M., 2013, 384 pp. (in Russian)

[24] S.D. Shtovba, Design of fuzzy systems by means of MATLAB, Goryachaya Liniya, M., 2007, 284 pp. (in Russian)

[25] A.N. Bakhtiyari, “A review on applications of artificial intelligence in modeling and optimization of laser beam machining”, Optics Laser Technology, 135 (2021), 106721 | DOI

[26] M. Madic [et al.], “Fuzzy Logic Approach for the Prediction of Dross Formation in CO$_2$ Laser Cutting of Mild Steel”, Journal of Engineering Science Technology Review, 8:3 (2015), 143–150 | DOI

[27] M. Madic, Z. Cojbasic, M. Radovanovic, “Comparison of fuzzy logic, regression and ANN laser kerf width models”, UPB Scientific Bulletin, Series D: Mechanical Engineering, 78 (2016), 197–212