Correlation of attracting sets of tool deformations with spatial orientation of tool elasticity and regeneration of cutting forces in turning

V. L. Zakovorotnyj ; V. E. Gvindzhilija

Izvestiya VUZ. Applied Nonlinear Dynamics, Tome 30 (2022) no. 1, pp. 37-56.

Résumé

Nowadays, the dynamic cutting system is represented in the form of two subsystems — tool and workpiece, interacting through a nonlinear relationship formed by the cutting process. Such a representation determines the importance of studying the dynamics of the cutting process as the main factor influencing the efficiency of machines, the trajectories of the executive elements of which are set by CNC and are provided with high accuracy. However, in order to improve the efficiency of cutting, it is necessary to align the trajectories of the executive elements are defined by CNC with the changing dynamics of cutting, which introduces deviations in the program-defined trajectories. Purpose of this article is to consider the dependence of the dynamics of the cutting process on the spatial orientation of the cutting tool elasticity and the regenerative effect, and to find out the effect of the proposed dependence on the efficiency of the cutting process. All the issues discussed in the article are analyzed using the example of external shaft turning. Methods. The study is based on the methods of mathematical modeling and experimental dynamics. In contrast to the known studies, the dependence of the turnover lag time on the oscillatory displacements in the direction of the cutting speed, as well as the influence of the positive feedback formed in this case, is taken into account. In addition, changes in the sign of the internal feedback from the direction of deformations, as well as the influence of the regenerative effect on the generated attracting sets of deformations are taken into account. Results. Dependence of the system evolution on the elements of the stiffness matrix at different spindle speeds is disclosed. The properties of the system evolution depending on the ratio of the spindle rotation frequency and the eigenfrequencies of the tool subsystem, as well as the spatial distribution of the stiffness are studied. Conclusion. The frequency and time characteristics of the system are discussed. Conclusion is made about the possibility of efficiency increasing of the cutting process based on the coordination of the CNC program with the dynamic properties of the system.

Détail

Keywords: effect of regeneration of cutting forces, stability and attracting sets of deformations, cutting process efficiency.

Bibliographie

[1] Kudinov V. A., Dinamika stankov, Mashinostroenie, M., 1967, 359 pp.

[2] Hahn R. S., “On the theory of regenerative chatter in precision-grinding operations”, Transactions of American Society of Mechanical Engineers, 76 (1954), 593–597

[3] Tobias S. A., Fishwick W., “Theory of regenerative machine tool chatter”, The Engineer, 205:7 (1958), 199–203

[4] Tobias S. A., Machine Tool Vibrations, Blackie, London, 1965, 351 pp.

[5] Tlustý J., Poláček M., Daněk O., Špaček L., Selbsterregte Schwingungen an Werkzeugmaschinen, Verlag Technik, Berlin, 1962, 431 pp.

[6] Tlustý J., Ismail F., “Basic non-linearity in machining chatter”, CIRP Annals, 30:1 (1981), 299–304 | DOI

[7] Merritt H. E., “Theory of self-excited machine-tool chatter: Contribution to machine-tool chatter research”, ASME Journal of Engineering, 87:4 (1965), 447–454 | DOI

[8] Altintaş Y., Budak E., “Analytical prediction of stability lobes in milling”, CIRP Annals, 44:1 (1995), 357–362 | DOI

[9] Elyasberg M. E., Avtokolebaniya metallorezhuschikh stankov: Teoriya i praktika, Osoboe KB stankostroeniya, SPb., 1993, 180 pp.

[10] Zakovorotnyi V. L., Fam D. T., Bykador V. S., “Samoorganizatsiya i bifurkatsii dinamicheskoi sistemy obrabotki metallov rezaniem”, Izvestiya vuzov. PND, 22:3 (2014), 26–39 | DOI

[11] Zakovorotnyi V. L., Gubanova A. A., Lukyanov A. D., “Ispolzovanie sinergeticheskoi kontseptsii dlya izucheniya ustoichivosti formoobrazuyuschikh traektorii poputnogo frezerovaniya”, STIN, 2016, no. 4, 32–40

[12] Zakovorotnyi V. L., Gubanova A. A., Lukyanov A. D., “Usloviya parametricheskogo samovozbuzhdeniya dinamicheskoi sistemy frezerovaniya kontsevymi frezami”, STIN, 2016, no. 6, 10–16

[13] Zakovorotnyi V. L., Gvindzhiliya V. E., “Analiz vliyaniya bienii shpindelnoi gruppy tokarnogo stanka na traektorii deformatsionnykh smeschenii instrumenta”, STIN, 2018, no. 2, 11–20

[14] Zakovorotnyi V. L., Gvindzhiliya V. E., “Svyaz samoorganizatsii dinamicheskoi sistemy rezaniya s iznashivaniem instrumenta”, Izvestiya vuzov. PND, 28:1 (2020), 46–61 | DOI

[15] Veits V. L., Vasilkov D. V., “Zadachi dinamiki, modelirovaniya i obespecheniya kachestva pri mekhanicheskoi obrabotke malozhestkikh zagotovok”, STIN, 1999, no. 6, 9–13

[16] Zakovorotnyi V. L., Flek M. B., Dinamika protsessa rezaniya, Terra, Sinergeticheskii podkhod Rostov-na-Donu, 2006, 876 pp.

[17] Pontryagin L. S., Izbrannye trudy L. S. Pontryagina, MAKS Press, M., 2004, 551 pp.

[18] Tikhonov A. N., “Sistemy differentsialnykh uravnenii, soderzhaschie malye parametry pri proizvodnykh”, Matematicheskii sbornik, 31(73):3 (1952)

[19] Lipski J., Litak G., Rusinek R., Szabelski K., Teter A., Warminski J., Zaleski K., “Surface quality of a work material influence on vibrations in a cutting process”, Journal of Sound and Vibration, 252 (2002), 729–737 | DOI

[20] Gorodetskii Yu. I., “Teoriya nelineinykh kolebanii i dinamika stankov”, Vestnik Nizhegorodskogo universiteta im. N.I. Lobachevskogo. Seriya: Matematicheskoe modelirovanie i optimalnoe upravlenie, 2001, no. 2, 69–88

[21] Balachandran B., “Nonlinear dynamics of milling processes”, Phil. Trans. R. Soc. A, 359:1781 (2001), 793–819 | DOI

[22] Litak G., Rusinek R., “Dynamics of a stainless steel turning process by statistical and recurrence analyses”, Meccanica, 47:6 (2012), 1517–1526 | DOI

[23] Gouskov A. M., Voronov S. A., Paris H., Batzer S. A., “Nonlinear dynamics of a machining system with two interdependent delays”, Communications in Nonlinear Science and Numerical Simulation, 7:4 (2002), 207–221 | DOI

[24] Voronov S. A., Ivanov I. I., Kiselev I. A., “Issledovanie protsessa frezerovaniya na osnove redutsirovannoi dinamicheskoi modeli instrumenta”, Problemy mashinostroeniya i nadezhnosti mashin, 2015, no. 1, 62–71

[25] Zakovorotnyi V. L., Lukyanov A. D., Gubanova A. A., Khristoforova V. V., “Bifurcation of stationary manifolds formed in the neighborhood of the equilibrium in a dynamic system of cutting”, Journal of Sound and Vibration, 368 (2016), 174–190 | DOI

[26] Litak G., “Chaotic vibrations in a regenerative cutting process”, Chaos, Solitons Fractals, 13:7 (2002), 1531–1535 | DOI

[27] Namachchivaya N. S., Beddini R., “Spindle speed variation for the suppression of regenerative chatter”, Journal of Nonlinear Science, 13:3 (2003), 265–288 | DOI

[28] Wahi P., Chatterjee A., “Self-interrupted regenerative metal cutting in turning”, International Journal of Non-Linear Mechanics, 43:2 (2008), 111–123 | DOI

[29] Warmiński J., Litak G., Lipski J., Wiercigroch M., Cartmell M., “Vibrations in regenerative cutting process synthesis of nonlinear dynamical systems”, Solid Mechanics and its Applications, 73 (2000), 275–283

[30] Stépán G., Szalai R., Insperger T., “Nonlinear dynamics of high-speed milling subjected to regenerative effect”, Nonlinear Dynamics of Production Systems, eds. Radons G., Neugebauer R., Wiley, Hoboken, New Jersey, 2004, 111–128 | DOI

[31] Stépán G., Insperger T., Szalai R., “Delay, parametric excitation, and the nonlinear dynamics of cutting processes”, International Journal of Bifurcation and Chaos, 15:9 (2005), 2783–2798 | DOI

[32] Stépán G., “Modelling nonlinear regenerative effects in metal cutting”, Phil. Trans. R. Soc. A, 359:1781 (2001), 739–757 | DOI

[33] Moradi H., Bakhtiari-Nejad F., Movahhedy M. R., Ahmadian M. T., “Nonlinear behaviour of the regenerative chatter in turning process with a worn tool: Forced oscillation and stability analysis”, Mechanism and Machine Theory, 45:8 (2010), 1050–1066 | DOI

[34] Guskov M., Din D. T., Panovko G., Guskov A. G., “Modelirovanie i issledovanie ustoichivosti protsessa mnogoreztsovogo rezaniya «po sledu»”, Problemy mashinostroeniya i nadezhnosti mashin, 2018, no. 4, 19–27 | DOI

[35] Lapshin V. P., “Vliyanie skorosti rezaniya metallov na regeneratsiyu vibratsionnykh kolebanii instrumenta v stankakh tokarnoi gruppy”, Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty), 22:1 (2020), 65–79 | DOI

[36] Reith M. J., Bachrathy M., Stépán G., “Improving the stability of multi-cutter turning with detuned dynamics”, Machining Science and Technology, 20:3 (2016), 440–459 | DOI

[37] Brissaud D., Gouskov A., Guibert N., Rech J., “Influence of the ploughing effect on the dynamic behaviour of the self-vibratory drilling head”, CIRP Annals, 57:1 (2008), 385–388 | DOI

[38] Gouskov A., Gouskov M., Lorong P., Panovko G., “Influence of flank face on the condition of chatter self-excitation during turning”, International Journal of Machining and Machinability of Materials, 19:1 (2017), 17–40 | DOI

[39] Rusinek R., Wiercigroch M., Wahi P., “Influence of tool flank forces on complex dynamics of cutting process”, International Journal of Bifurcation and Chaos, 24:9 (2014), 1450115 | DOI

[40] Rusinek R., Wiercigroch M., Wahi P., “Modelling of frictional chatter in metal cutting”, International Journal of Mechanical Sciences, 89 (2014), 167–176 | DOI

[41] Grabec I., “Chaos generated by the cutting process”, Phys. Lett. A, 117:8 (1986), 384–386 | DOI

[42] Wiercigroch M., Budak E., “Sources of nonlinearities, chatter generation and suppression in metal cutting”, Phil. Trans. R. Soc. A, 359:1781 (2001), 663–693 | DOI

[43] Wiercigroch M., Krivtsov A. M., “Frictional chatter in orthogonal metal cutting”, Phil. Trans. R. Soc. A, 359:1781 (2001), 713–738 | DOI

[44] Masoumi F., Pellicano F., Samani F. S., Barbieri M., “Symmetry breaking and chaos-induced imbalance in planetary gears”, Nonlinear Dynamics, 80:1–2 (2015), 561–582 | DOI

[45] Zakovorotnyi V. L., Gvindzhiliya V. E., “Vliyanie fluktuatsii na ustoichivost formoobrazuyuschikh traektorii pri tochenii”, Izvestiya vuzov. Severo-Kavkazskii region. Tekhnicheskie nauki, 2017, no. 2(194), 52–61 | DOI

[46] Zakovorotnyi V. L., Gvindzhiliya V. E., “Vliyanie vibratsii na traektorii formoobrazuyuschikh dvizhenii instrumenta pri tochenii”, Obrabotka metallov (tekhnologiya, oborudovanie, instrumenty), 21:3 (2019), 42–58 | DOI

[47] Zakovorotnyi V. L., Gvindzhiliya V. E., “Sinergeticheskaya kontseptsiya pri programmnom upravlenii protsessami obrabotki na metallorezhuschikh stankakh”, Izvestiya vysshikh uchebnykh zavedenii. Mashinostroenie, 2021, no. 5(734), 24–36 | DOI

[48] Lyapunov A. M., Obschaya zadacha ob ustoichivosti dvizheniya, Gostekhizdat, M., 1950, 472 pp.

[49] Zakovorotnyi V. L., Fam T. Kh., “Parametricheskoe samovozbuzhdenie dinamicheskoi sistemy rezaniya”, Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta, 13:5–6(74) (2013), 97–103 | DOI

[50] Besekerskii V. A., Popov E. P., Teoriya sistem avtomaticheskogo regulirovaniya, Nauka, M., 1975, 768 pp.

[51] Zakovorotnyi V. L., Fam D. T., Nguen S. T., “Modelirovanie deformatsionnykh smeschenii instrumenta otnositelno zagotovki pri tochenii”, Vestnik Donskogo gosudarstvennogo tekhnicheskogo universiteta, 10:7(50) (2010), 1005–1015

[52] Ryzhkin A. A., Sinergetika iznashivaniya instrumentalnykh materialov pri lezviinoi obrabotke, DGTU, Rostov-na-Donu, 2019, 289 pp.

[53] Push A. V., Shpindelnye uzly: Kachestvo i nadezhnost, Mashinostroenie, M., 1992, 288 pp.

[54] Khusu A. P., Vitenberg Yu. R., Palmov V. A., Sherokhovatost poverkhnostei. Teoretiko-veroyatnostnyi podkhod, Nauka, M., 1975, 344 pp.

[55] Zakovorotnyi V. L., Flek M. B., Lukyanov A. D., Voloshin D. A., “Modelirovanie protsessa iznashivaniya instrumenta s pomoschyu integralnykh operatorov”, STIN, 2004, no. 3, 9–14

[56] Zakovorotny V. L., Gvindjiliya V. E., “Self-organization and evolution in dynamic friction systems”, Journal of Vibroengineering, 23:6 (2021), 1418–1432 | DOI

[57] Altintas Y., Kersting P., Biermann D., Budak E., Denkena B., Lazoglu I., “Virtual process systems for part machining operations”, CIRP Annals, 63:2 (2014), 585–605 | DOI

[58] Kilic Z. M., Altintas Y., “Generalized mechanics and dynamics of metal cutting operations for unified simulations”, International Journal of Machine Tools and Manufacture, 104 (2016), 1–13 | DOI