On identification of two-dimensional density of an elastic inhomogeneous cylinder

V. V. Dudarev ; V. N. Dyadechko

Izvestiya of Saratov University. Mathematics. Mechanics. Informatics, Tome 24 (2024) no. 3, pp. 381-393.

Résumé

Within the framework of the linear theory of elasticity, using the model of an isotropic body, the problem of steady-state vibrations of an inhomogeneous hollow cylinder is formulated. The vibrations of the cylinder are caused by a load applied to the side surface, and the conditions of sliding embedding are implemented at the ends. The variable material properties are described by the Lamé parameters and density, which change along the radial and longitudinal coordinates. The direct problem solution of the cylinder vibrations is constructed using the finite element method implemented in the FlexPDE package, its main advantages are noted. To study the influence of variable properties on the values of resonant frequencies and components of the displacement field, the laws of these properties are considered in the general form used in modern works for modeling functionally graded materials. On the basis of the performed numerical calculations, the degree of influence of the amplitude values of each of the Lamé parameters and density on the first resonant frequency and the displacement field are studied. Graphs are also presented that demonstrate the influence of the type of the law of density change on the values of the displacement field components. A new inverse coefficient problem is formulated to determine the density distribution function in the cylinder wall from the displacement field data measured at a finite set of points inside the considered area for a fixed frequency. The main difficulties in the implementation of the reconstruction procedure in practice are noted. To increase the accuracy of calculating the first and second derivatives of the two-dimensional functions calculated in the finite element package, which are used in solving the inverse problem, an approach based on the locally weighted regression algorithm is proposed. The results of computational experiments on solving the inverse problem are presented, which demonstrate the possibility of using the proposed method to restore various types of two-dimensional laws of density. Practical recommendations are given for the implementation of the most accurate reconstruction procedure.

Bibliographie

[1] V. A. Lomakin, Teoriya uprugosti neodnorodnykh tel, Lenand, M., 2014, 367 pp.

[2] V. V. Kalinchuk, T. I. Belyankova, Dinamika poverkhnosti neodnorodnykh sred, Fizmatlit, M., 2009, 312 pp.

[3] Y. Miyamoto, W. A. Kaysser, B. H. Rabin, A. Kawasaki, R. G. Ford, Functionally Graded Materials: Design, Processing and Applications, Materials Technology Series, 5, Springer, New York, 1999, 330 pp. | DOI

[4] I. M. El-Galy, B. I. Saleh, M. H. Ahmed, “Functionally graded materials classifications and development trends from industrial point of view”, SN Applied Sciences, 1 (2019), 1378 | DOI

[5] S. Chandrasekaran, Design of Marine Risers with Functionally Graded Materials, Woodhead Publ, Cambridge, 2021, 143 pp. | DOI

[6] M. Majid, R. Masoud, G. Majid, “Functionally graded materials (FGMs): A review of classifications, fabrication methods and their applications”, Processing and Application of Ceramics, 15:4 (2021), 319–343 | DOI | MR

[7] Sh. Das, S. Das, T. Nampi, K. Roy, D. Brabazon, “Functionally grade composite material production”, Encyclopedia of Materials: Composites, Elsevier, Oxford, 2021, 798–803 | DOI

[8] H. L. Dai, Y. N. Rao, T. Dai, “A review of recent researches on FGM cylindrical structures under coupled physical interactions, 2000-2015”, Composite Structures, 152 (2016), 199–225 | DOI

[9] N. Ida, N. Meyendorf (eds.), Handbook of Advanced Nondestructive Evaluation, Springer, Cham, 2019, 1626 pp. | DOI

[10] A. O. Vatulyan, Obratnye zadachi v mekhanike deformiruemogo tverdogo tela, Fizmatlit, M., 2007, 224 pp.

[11] A. O. Vatulyan, Koeffitsientnye obratnye zadachi mekhaniki, Fizmatlit, M., 2019, 272 pp.

[12] A. O. Vatulyan, V. V. Dudarev, R. M. Mnukhin, R. D. Nedin, “Identification of the Lame parameters of an inhomogeneous pipe based on the displacement field data”, European Journal of Mechanics A/Solids, 81 (2020), 103939 | DOI | MR | Zbl

[13] Gallager R., Metod konechnykh elementov. Osnovy, Mir, M., 1984, 430 pp. | MR

[14] Lure A. I., Teoriya uprugosti, Nauka, M., 1970, 939 pp.

[15] V. V. Dudarev, R. M. Mnukhin, R. D. Nedin, A. O. Vatulyan, “Effect of material inhomogeneity on characteristics of a functionally graded hollow cylinder”, Applied Mathematics and Computation, 382 (2020), 125333 | DOI | MR | Zbl

[16] M. Asgari, M. Akhlaghi, “Natural frequency analysis of 2D-FGM thick hollow cylinder based on three-dimensional elasticity equation”, European Journal of Mechanics A/Solids, 30:2 (2011), 72–81 | DOI | Zbl

[17] A. O. Vatulyan, V. V. Dudarev, R. M. Mnukhin, “Identification of characteristics of a functionally graded isotropic cylinder”, International Journal of Mechanics and Materials in Design, 17 (2021), 321–332 | DOI | MR

[18] B. Koohbor, S. Mallon, A. Kidane, A. Anand, V. Parameswaran, “Through thickness elastic profile determination of functionally graded materials”, Experimental Mechanics, 55:8 (2015), 1427–1440 | DOI

[19] W. S. Cleveland, “Robust locally weighted regression and smoothing Scatterplots”, Journal of the American Statistical Association, 74:368 (1979), 829–836 | DOI | MR | Zbl

[20] S. Marzavan, V. Nastasescu, “Displacement calculus of the functionally graded plates by finite element method”, Alexandria Engineering Journal, 61:12 (2022), 12075–12090 | DOI