Geodesic
Orientation dependence of functional properties of alloys with shape memory effect and superelasticity
Čelâbinskij fiziko-matematičeskij žurnal, Tome 4 (2019) no. 2, pp. 221-240.

Voir la notice de l'article provenant de la source Math-Net.Ru

As applied to alloys with shape memory effects (SME) and superelasticity (SE), the results of an X-ray study of the orientational dependence of their functional properties are presented, which are associated with martensitic transformations (MTs) underlying the above effects. The observed orientational effects are conditioned by the inhomogeneity of the substructure state of grains with different orientations in polycrystalline materials and the anisotropy of the influence of the given loads on the alloy crystal lattice. It was shown that the detection of the inhomogeneous flow of MPs in grains of studied samples proves to be possible only due to of the selectivity of X-ray diffraction. In particular, it was found the following facts: (1) The width of the reverse MT interval in a rolled and quenched Ti-Ni alloy varies more than by 40 K; (2) foils from the Fe-28% Ni-5Mo% alloy, stretched along and across the rolling direction, differ in temperatures of the reverse MT beginning by 200 K; (3) the 100% SME was observed in single crystals from a Ti – Ni alloy with stable orientations by a given deformation of $\sim$ 15%; (4) the SME in foils from the Fe-28Ni-5Mo alloy, stretched in different directions to the defining deformation $\delta \approx 6$ %, differ by an order of value. It has been established that in superelastic Ti-Nb-based alloys, which have a two-component rolling texture, like all metallic materials with a bcc lattice, the martensitic transformation $\beta \leftrightarrow \alpha''$ under compression is localized in less fragmented grains with the rolling plane $\{001\}$, while in grains with the rolling plane $\{111\}$ it is almost absent.
Keywords: shape memory effect, superelastisity, texture, functional properties, Ti-Ni, Fe-Ni-Mo, Ti-Nb-Zr. 
@article{CHFMJ_2019_4_2_a8,
     author = {M. G. Isaenkova and Yu. A. Perlovich and V. A. Fesenko and M. M. Zaripova},
     title = {Orientation dependence of functional properties of alloys with shape memory effect and superelasticity},
     journal = {\v{C}el\^abinskij fiziko-matemati\v{c}eskij \v{z}urnal},
     pages = {221--240},
     publisher = {mathdoc},
     volume = {4},
     number = {2},
     year = {2019},
     language = {ru},
     url = {http://geodesic.mathdoc.fr/item/CHFMJ_2019_4_2_a8/}
}
TY  - JOUR
AU  - M. G. Isaenkova
AU  - Yu. A. Perlovich
AU  - V. A. Fesenko
AU  - M. M. Zaripova
TI  - Orientation dependence of functional properties of alloys with shape memory effect and superelasticity
JO  - Čelâbinskij fiziko-matematičeskij žurnal
PY  - 2019
SP  - 221
EP  - 240
VL  - 4
IS  - 2
PB  - mathdoc
UR  - http://geodesic.mathdoc.fr/item/CHFMJ_2019_4_2_a8/
LA  - ru
ID  - CHFMJ_2019_4_2_a8
ER  - 
%0 Journal Article
%A M. G. Isaenkova
%A Yu. A. Perlovich
%A V. A. Fesenko
%A M. M. Zaripova
%T Orientation dependence of functional properties of alloys with shape memory effect and superelasticity
%J Čelâbinskij fiziko-matematičeskij žurnal
%D 2019
%P 221-240
%V 4
%N 2
%I mathdoc
%U http://geodesic.mathdoc.fr/item/CHFMJ_2019_4_2_a8/
%G ru
%F CHFMJ_2019_4_2_a8
M. G. Isaenkova; Yu. A. Perlovich; V. A. Fesenko; M. M. Zaripova. Orientation dependence of functional properties of alloys with shape memory effect and superelasticity. Čelâbinskij fiziko-matematičeskij žurnal, Tome 4 (2019) no. 2, pp. 221-240. http://geodesic.mathdoc.fr/item/CHFMJ_2019_4_2_a8/

[1] Perlovich Yu.A., Isaenkova M.G., Structural heterogeneity of textured metal materials, National Research University “MEPhI”, Moscow, 2015, 398 pp. (In Russ.)

[2] Isaenkova M.G., Perlovich Yu.A., Regularity of the development of crystallographic texture and substructural heterogeneity in zirconium alloys during deformation and heat treatment, National Research University “MEPhI”, Moscow, 2014, 528 pp. (In Russ.)

[3] Pushin V.G., “Nickel titanium alloys with shape memory”, Structure, phase transformations and properties, part 1, Institute of Metal Physics of the Ural Branch of Russian Academy of Sciences, Ekaterinburg, 2006, 356–413 (In Russ.)

[4] H. Y. Kim, T. Sasaki, K. Okutsu [et al.], “Texture and shape memory behavior of Ti–22Nb–6Ta alloy”, Acta Materialia, 54:2 (2006), 423–433 | DOI

[5] J. I. Kim, H. Y. Kim, T. Inamura [et al.], “Effect of annealing temperature on microstructure and shape memory characteristics of Ti–22Nb–6Zr (at.%) biomedical alloy”, Materials Transactions, 47:3 (2006), 505–512 | DOI | MR

[6] V. Brailovski, S. Prokoshkin, M. Gauthier [et al.], “Bulk and porous metastable beta Ti-Nb-Zr(Ta) alloys for biomedical applications”, Materials Science and Engineering: C, 31 (2011), 643–657 | DOI

[7] H. Y. Kim, S. Miyazaki, “Several issues in the development of Ti-Nb-based shape memory alloys”, Shape Memory and Superelasticity, 2:4 (2016), 380–390 | DOI

[8] T. Inamura, R. Shimizub, H. Y. Kim [et al.], “Optimum rolling ratio for obtaining {001}$\langle110\rangle$ recrystallization texture in Ti-Nb-Al biomedical shape memory alloy”, Materials Science and Engineering: C, 61 (2016), 499–505 | DOI

[9] Yu. Perlovich, M. Isaenkova, S. Chekanov, V. Fesenko, O. Krymskaya, “Superelastic alloy Ti-22%Nb-6%Zr: X-ray study of deformation features”, IOP Conference Series: Materials Science and Engineering, 130, 2016, 012034 | DOI

[10] M. Isaenkova, Yu. Perlovich, A. Osintsev, V. Fesenko, M. Zaripova, “Methods of research of shape memory effect and superelasticity in the alloy Ti-22%Nb-6%Zr”, Materials of Innovative Energy: Development, Characterization Methods and Application: 15th International School-Conference. KnE Material Science, New Materials, 2018, 2018, 221–231

[11] V. Fesenko, Yu. Perlovich, “Martensitic transformation development in the rolled Ti-Ni alloy: varying of temperature parameters depending on grain orientation”, J. de Physique IV, 6:C1 (1996), C1-197–C1-202

[12] Yu. Perlovich, H. J. Bunge, V. Fesenko [et al.], “Inhomogeneity of phase transformations $\beta \rightarrow \omega$ and $\beta \rightarrow \alpha$ in the quenched cold-rolled alloy Zr-20%Nb”, J. de Physique IV, 6:C1 (1996), C1-149–C1-156

[13] Yu. Perlovich, M. Isaenkova, H. J. Bunge, V. Fesenko, R. Rustamov, “X-ray study of rolled single crystals of Ti-48%Ni-2%Fe alloy. Part 1: Texture development and mechanisms of plastic deformation”, Materials Science Forum, 273–275 (1998), 655–666 | DOI

[14] Yu. Perlovich, M. Isaenkova, H. J. Bunge, V. Fesenko, “Equilibrium of elastic microstresses in textured metal materials”, Textures and Microstructures, 33 (1999), 303–319 | DOI

[15] Yu. Perlovich, M. Isaenkova, H. J. Bunge, V. Fesenko, “Distribution of residual microstresses in rolled textured metal materials”, Materials Science Forum, 347–349 (2000), 291–296 | DOI

[16] Yu. Perlovich, M. Isaenkova, H. J. Bunge, “General newly-discovered regularities of structure inhomogeneity in textured metal materials”, Materials Science Forum, 378–381 (2001), 174–179 | DOI

[17] Yu. Perlovich, M. Isaenkova, H. J. Bunge, V. Fesenko, “Texture formation and distribution of residual microstrains in rolled Ti-48%Ni-2%Fe single crystals with shape memory properties”, Materials Science Forum, 408–412 (2002), 1145–1150 | DOI

[18] Yu. Perlovich, M. Isaenkova, V. Fesenko, “Texture formation and development of substructure inhomogeneity by plastic deformation of metal materials: general new-discovered regularities”, Materials science issues (Saint-Petersburg, Russia, 4–7 June, 2002), Physics and Mechanics of Large Plastic Strains. Proceedings of the First Russian-French Symposium, 33, no. 1, 2003, 233–243 (In Russ.)

[19] Yu. Perlovich, M. Isaenkova, “New principles of the substructure development in metal materials under plastic deformation, revealed by advanced X-ray method”, Materials Science Forum, 443–444 (2004), 259–262 | DOI

[20] Perlovich Yu.A., Isaenkova M.G., Fesenko V.A., “Regularities of substructural heterogeneity of deformed metal materials”, News of Russian Acadeny of Sciences. Physical series, 68:10 (2004), 1462–1471 (In Russ.)

[21] Yu. Perlovich, M. Isaenkova, H. J. Bunge, V. Fesenko, “Substructure inhomogeneity of textured materials by the example of rolled Ti-Ni single crystals”, Solid State Phenomena, 105 (2005), 207–212 | DOI

[22] Yu. Perlovich, M. Isaenkova, H. J. Bunge, V. Fesenko, “Development of non-uniform substructure and micro-strain distribution by texture formation in metal materials”, Materials Science Forum, 495–497 (2005), 77–86

[23] Yu. Perlovich, M. Isaenkova, V. Fesenko, “General principles of substructure inhomogeneity, arising in metal materials under plastic deformation”, Materials Science Forum, 550 (2007), 253–258 | DOI

[24] Yu. Perlovich, M. Isaenkova, V. Fesenko, “Three laws of substructure anisotropy of textured metal materials, revealed by X-ray method of generalized pole figures”, Materials Processing and Texture, Ceramic Transactions, 200 (2008), 539–546

[25] Yu. Perlovich, M. Isaenkova, V. Fesenko, “Principles of microstress equilibrium in textured metal materials”, Advances in X-ray Analysis, 53 (2009), 125–140

[26] Yu. Perlovich, M. Isaenkova, V. Fesenko, “Texture versus residual deformation effects in metal materials: principles of experimental approach and general regularities”, Solid State Phenomena, 160 (2010), 31–38 | DOI

[27] Yu. Perlovich, M. Isaenkova, V. Fesenko [et al.], “Variants of texture formation by rolling of Ti-Ni Single crystals with shape memory properties”, Materials Science Forum, 702–703 (2012), 900–903

[28] Yu. Perlovich, M. Isaenkova, “Non-uniform strain hardening of crystallites within different regions of texture maxima: evidences and mechanism”, Materials Science Forum, 702–703 (2012), 681–684

[29] Yu. Perlovich, M. Isaenkova, V. Fesenko, T. Dementyeva, “Distribution of residual elastic microstress in rolled Ti-Ni single crystals”, Materials Science Forum, 738–739 (2013), 92–96 | DOI

[30] M. Isaenkova, Yu. Perlovich, V. Fesenko, T. Dementyeva, “Twinning in Ti-48%Ni-2%Fe single crystals under rolling”, Materials Science Forum, 738–739 (2013), 118–122 | DOI

[31] Perlovich Yu.A., Isaenkova M.G., Fesenko V.A., Dementyeva T.I., “Regularities of the orientational dependence of the martensitic transformation in the Fe-28%Ni-5%Mo alloy with shape memory effect under tensile deformation”, Deformation and destruction of materials, 2014, no. 12, 27–31 (In Russ.)

[32] Perlovich Yu.A., Isaenkova M.G., Fesenko V.A., “Inhomogeneity of the formation of deformation martensite in a rolled foil from an alloy of Fe-28%Ni-5%Mo upon bending”, Materials Science, 2015, no. 5, 17–23 (In Russ.)

[33] Perlovich Yu.A., Isaenkova M.G., Chekanov S.V., Fesenko V.A., Krymskaya O.A., “Features of the formation of deformation martensite in a foil of the superelastic alloy Ti-22%Nb-6%Zr during bending”, Advanced Materials and Technologies. Proceedings of the International Symposium (Vitebsk), 2015, 52–55 (In Russ.)

[34] Perlovich Yu.A., Isaenkova M.G., Chekanov S.V., Fesenko V.A., Krymskaya O.A., “Superelastic alloy Ti-22%Nb-6%Zr: X-ray study of deformation features”, Advanced Materials and Technologies. Proceedings of the International Symposium (Vitebsk), 2015, 131–134 (In Russ.)

[35] V. Fesenko, Yu. Perlovich, M. Isaenkova, “The increased shape memory effect in rolled Ti-48%Ni-2%Fe single crystals”, Materials Today, 12:2 (2015), 751–754

[36] Y. A. Perlovich, M. G. Isayenkova, V. A. Fesenko, T. I. Dementyeva, “Formation inhomogeneity of deformation martensite in rolled foil of Fe–28%Ni–5%Mo alloy under bending”, Inorganic Materials: Applied Research, 7:1 (2016), 9–14 | DOI

[37] M. Isaenkova, Yu. Perlovich, E. Efimova, D. Zhuk, O. Krymskaya, “Superelasticity of Ti-Nb-Zr alloys and their medical application”, Materials Science Forum, 879 (2017), 2561–2566 | DOI

[38] M. Isaenkova, Yu. Perlovich, V. Fesenko, “Modern methods of experimental construction of texture complete direct pole figures by using X-ray data”, IOP Conference Series: Materials Science and Engineering, 130 (2016), 012055 | DOI