Design optimisation of labyrinth seals using LES

J.C. Tyacke¹ ; Y. Dai² ; R. Watson³ ; P.G. Tucker²

¹ Department of Mechanical and Aerospace Engineering, Brunel University London, London, UK.
² Department of Engineering, University of Cambridge, Cambridge, UK.
³ School of Mechanical and Aerospace Engineering, Queen’s University Belfast, Belfast, UK.

Mathematical modelling of natural phenomena, Tome 16 (2021), article no. 2

Résumé

Labyrinth seals are extensively used in gas turbines to control leakage between components. In this research, the effects of geometry on the sealing performance are investigated. To obtain the best sealing performance, an investigation is undertaken into the possibility of optimising labyrinth seal planforms using a genetic algorithm (GA). Large Eddy Simulation (LES) is used for its ability to accurately capture the complex unsteady behaviour of this type of flow. Three hundred LES calculations are carried out. By making use of a large number of processors, an optimum geometry can be achieved within design cycle timescales. The optimised design shows a leakage reduction of 27.6% compared to the baseline geometry. An immersed boundary method (IBM) is used with LES to generate complex geometries on a background Cartesian grid. The GA is inherently parallel, and this enables the exploitation of the reliability and accuracy benefit of LES as demonstrated.

Détail

DOI : 10.1051/mmnp/2020056

Bibliographie

[1] E.A. Baskharone, A. Ghali Theoretical vs experimental rotordynamic coefficients of incompressible flow labyrinth seals J. Propul. Power 1994 721 728

[2] D.W. Childs and J.M. Vance, Annular gas seals and rotordynamics of compressors and turbines, in Proceedings of the 26th Turbomachinery Symposium (1997) 201–220.

[3] Y. Dai, Large Eddy Simulation of labyrinth seals and rib shapes for internal cooling passages. PhD. thesis, Department of Engineering, Cambridge University (2017).

[4] J.A. Domaradzki and D.D. Holm, Navier-Stokes-alpha model: LES equations with nonlinear dispersion. APS Division of Fluid Dynamics Meeting Abstracts (2001).

[5] J. Fasheh, Review and summary of labyrinth seal theory and design, TMR Report (1972) 2115–3351.

[6] A.J. Gamal, J.M. Vance Labyrinth seal leakage tests: tooth profile, tooth thickness, and eccentricity effects J. Eng. Gas Turbines Power 2008 012510

[7] B.J. Geurts, D.D. Holm Leray and lans-α modelling of turbulent mixing J. Turbulence 2006 10

[8] J.T. Han, A fluid mechanics model to estimate the leakage of incompressible fluids through labyrinth seals, Oak Ridge National Laboratory report TM-6373 (1978).

[9] J. Holland, Adaptation in natural and artificial systems, univ. of mich. press, Ann Arbor (1975).

[10] R. Jin, W. Chen, T.W. Simpson Comparative studies of metamodelling techniques under multiple modelling criteria Struct. Multidiscip. Optim 2001 1 13

[11] R. Kerr and P.G. Tucker, Mixed nonlinear LES for DES suitable flows. 43rd AIAA Aerospace Sciences Meeting and Exhibit (2005) 10 pages.

[12] S. Kirkpatrick, C.D. Gelatt, M.P. Vecchi Optimization by simulated annealing Science 1983 671 680

[13] K.-S. Lee, K.-Y. Kim, A. Samad Design optimization of low-speed axial flow fan blade with three-dimensional RANS analysis J. Mech. Sci. Technol 2008 1864 1869

[14] Y. Liu, P.G. Tucker, R. Kerr Linear and nonlinear model large-eddy simulations of a plane jet Comput. Fluids 2008 439 449

[15] Z. Lu, Y. Xie, D. Qiu The finite–difference simulation of flow field in labyrinth seals Chin. J. Appl. Mech 1992

[16] C. Meneveau, J. Katz Scale-Invariance and turbulence models for Large-Eddy Simulation Annu. Rev. Fluid Mech 2000 1 32

[17] G. Morrison and D. Chi, Incompressible flow in stepped labyrinth seals, Joint Applied Mechanics, Fluids Engineering, and Bioengineering Conference, Albuquerque, June 24–26 (1985).

[18] M. Michaud, A. Vakili, A. Meganathan, R. Zielke, L. Shuster and J. Terrell, An experimental study of labyrinth seal flow, in International Joint Power Generation Conference collocated with TurboExpo 2003. American Society of Mechanical Engineers (2003) 497–504.

[19] S. Obayashi, S. Takanashi Genetic optimization of target pressure distributions for inverse design methods AIAA J 1996 881 886

[20] S. Pierret, Multi-objective and multi-disciplinary optimization of three-dimensional turbomachinery blades. Proceedings of the 6th worldcongresses of structural and multidisciplinary optimization (2005).

[21] A. Preece, An investigation into methods to aid the simulation of turbulent separation control. PhD. thesis, Fluid Dynamics Research Centre, University of Warwick (2008).

[22] D. Rhode, S. Ko, G. Morrison Leakage optimization of labyrinth seals using a Navier-Stokes code Tribol. Trans 1994 105 110

[23] D.L. Rhode and B.F. Allen, Visualization and measurements of rub-groove leakage effects on straight-through labyrinth seals, in ASME 1998 International Gas Turbine and Aeroengine Congress and Exhibition. American Society of Mechanical Engineers (1998) V004T09A085–V004T09A085.

[24] D.L. Rhode and R.G. Adams, Relative axial displacement leakage effects on straight-through labyrinth seals with rub grooves, 40th AIAA/ASME/SAE/ASEE Joint Propulsion Conference and Exhibit, v11-14th July, Fort Lauderdale, Florida, USA, AIAA-2004-3716 (2004).

[25] D. Rhode, R. Hibbs Tooth thickness effect on the performance of gas labyrinth seals J Tribol 1992 790 795

[26] D. Rhode, R. Hibbs Clearance effects on corresponding annular and labyrinth seal flow leakage characteristics J. Tribol 1993 699 704

[27] V. Schramm, J. Denecke, S. Kim, S. Wittig Shape optimization of a labyrinth seal applying the simulated annealing method Int. J. Rotating Mach 2004 365 371

[28] H. Stoff Incompressible flow in a labyrinth seal J. Fluid Mech 1980 817 829

[29] H. Theil, A rank-invariant method of linear and polynomial regression analysis, in Henri Theil’s Contributions to Economics and Econometrics. Springer (1992) 345–381.

[30] Y.-H. Tseng, J.H. Ferziger A ghost-cell immersed boundary method for flow in complex geometry J. Comput. Phys 2003 593 623

[31] P.G. Tucker, Computation of unsteady internal flows: fundamental methods with case studies. Springer Science Business Media (2001).

[32] J. Tyacke, R. Jefferson-Loveday and P.G. Tucker, Application of LES to labyrinth seals. Proceedings of the AIAA CFD Conference, No. AIAA-2011-3861 (2011).

[33] J. Tyacke, R. Jefferson-Loveday, P. Tucker On the application of LES to seal geometries Flow Turbulence Combust 2013 827 848

[34] J. Tyacke, Low Reynolds number heat transfer prediction employing Large Eddy Simulation for electronics geometries. PhD. thesis, Civil and Computational Engineering Centre, Swansea University (2009).

[35] J.C. Tyacke, P.G. Tucker Large eddy simulation of turbine internal cooling ducts Comput. Fluids 2015 130 140

[36] J.C. Tyacke, P.G. Tucker LES of heat transfer in electronics Appl. Math. Model 2012 3112 3133

[37] A. Vakili, A. Meganathan, M. Michaud and S. Radhakrishnan, An experimental and numerical study of labyrinth seal flow, in ASME Turbo Expo 2005: Power for Land, Sea, and Air. American Society of Mechanical Engineers (2005) 1121–1128.

[38] R. Watson, P. Tucker Perfectly parallel optimization for cutback trailing Edges AIAA J 2016 1 10

[39] R. Watson, Large eddy simulation of cutback trailing edges for film cooling turbine blades. PhD. thesis, Department of Engineering, Cambridge University (2013).

[40] R. Watson, P. Tucker, Z.-N. Wang, X. Yuan Towards robust unstructured turbomachinery large eddy simulation Comput. Fluids 2015 245 254

[41] W. Waschka, S. Wittig, S. Kim Influence of high rotational speeds on the heat transfer and discharge coefficients in labyrinth seals J. Turbomach 1992 462 468

[42] S. Wittig, L. Dorr, S. Kim Scaling effects on leakage losses in labyrinth Seals J. Eng. Power 1983 305 309

[43] A. Yoshizawa Bridging between eddy-viscosity-type and second-order turbulence models through a two-scale turbulence theory Phys. Rev. E 1993 273

[44] U. Yucel, J.Y. Kazakia Analytical prediction techniques for axisymmetric flow in gas labyrinth seals J. Eng. Gas Turbines Power 2001 255 257

[45] W. Zabriskie, B. Sternlicht Labyrinth seal leakage analysis J. Basic Eng 1959 332 340