Mathematical modeling for multi-parameter control considering design features of eddy-current converters

V. A. Veber

Vestnik Ûžno-Uralʹskogo gosudarstvennogo universiteta. Seriâ, Matematika, mehanika, fizika, Tome 11 (2019) no. 4, pp. 73-79

Résumé

This study considers the issues of mathematical modeling in case of multi-parameter control. The purpose of the article is to substantiate the necessity of taking into account the design features of the sensor when constructing mathematical models for multi-parameter control, and to develop a methodology for determining the generalizing characteristics — the design sensitivity coefficient of an eddy-current converter. The methodology is based on the analysis of hodographs of the eddy-current control. Simulation experiments in order to calculate design sensitivity for each control points as well as for every thickness of samples and for each size of gaps have been carried out. The obtained results allow us estimate design efficiency of the used eddy-current sensor.

Détail

Keywords: eddy-current test, design feature of the sensor, design sensitivity of eddy-current converter.

Bibliographie

[1] V. L. Dil'man, “Stress State and Strength of an Inhomogeneous Plastic Strip with a Defect in a Stronger Part”, Mechanics of Solids, 45:2 (2010), 226–237 | DOI

[2] N. S. Kogut, M. V. Shakhmatov, V. V. Erofeev, Bearing Capacity of Welded Joints, Svit Publ., L'vov, 1991, 182 pp. (in Russ.)

[3] V. L. Dil'man, A. A. Ostsemin, “Strength of Mechanically Heterogeneous Welded Joints with a SlitLike Defect”, Welding International, 13:8 (1999), 648–650 | DOI

[4] V. L. Dilman, A. A. Ostsemin, “Load-Carrying Capacity of Straight-Seam Large Diameter Pipes with Defects at the Fusion Boundary of the Welded Joint”, Welding International, 17:5 (2003), 376–380 | DOI

[5] V. L. Dilman, A. A. Ostsemin, “Static Strength of a Welded Joint with Hard Interlayers and Defect at the Fusion Line of the Weld”, Welding International, 18:10 (2004), 805–808 | DOI

[6] V. L. Dilman, A. A. Ostsemin, “Effects of Surface Defects on the Static Strength of Welds in SpiralSeam Tubes”, Chemical and Petroleum Engineering, 40:1–2 (2004), 87–93 | DOI

[7] V. L. Dilman, A. A. Ostsemin, “Analysis of the Ductile Strength of Welds Weakened by Notches in Longitudinally Welded Pipes of Large Diameter by the Method of Slip Lines”, Strength of Materials, 36:3 (2004), 274–281 | DOI

[8] V. L. Dil'man, A. A. Ostsemin, “Static Strength of Mechanically Nonuniform Welded Joints with a One-Sided Surface Defect Subject to Ductile Failure”, Chemical and Petroleum Engineering, 41:9–10 (2005), 522–529 | DOI

[9] V. L. Dil'man, A. A. Ostsemin, “Effect of Defects on the Load Carrying Capacity of Pipes of Transmission Oil and Gas Pipelines under Biaxial Loading”, Welding International, 20:1 (2006), 63–67 | DOI

[10] A. A. Ostsemin, V. L. Dil'man, “The Impact that Welding Defects Located at the Fusion Boundary Have on the Strength of a Welded Joint”, Vestnik mashinostroeniya, 2006, no. 2, 21–26 (in Russ.)

[11] V. L. Dil'man, T. V. Eroshkina, Mathematical Modeling of Soft Layers Critical State in Inhomogeneous Compounds, Izdatel'skiy Tsentr YuUrGU Publ., Chelyabinsk, 2011, 275 pp. (in Russ.)

[12] A. I. Nosacheva, “Mathematical Modelling a Stress State of Inhomogeneous Band with External Macrodefect”, Bulletin of the South Ural State University. Series “Mathematical Modelling, Programming Computer Software”, 6:3 (2013), 79–84 (in Russ.) | Zbl

[13] S. V. Petinov, V. G. Sidorenko, “A Review of Flaw Detection Methods for Pipeline Inspection”, Molodoy uchenyy, 2016, no. 2, 194–199 (in Russ.)

[14] Xu Jin-Long, Cao Biao, Hong Wu-Xing, Lu Shan-Sheng, Feng Jun-Han, Hua Bin, Yang Shu-Jie, “Domestic and International Standards for Non-Destructive Casing String Testing”, Metody nerazrushayushchego kontrolya, 36:10 (2014), 72–77 (in Russ.)

[15] Ch. Yan, “Physical and mathematical modeling of measurement transformations in eddy current fields”, Vestnik nauki Sibiri, 2013, no. 3, 75–85 (in Russ.)

[16] A. E. Gol'dshteyn, Physical Fundamentals of Information Obtainment, Textbook, Izd-vo Tomskogo politekhnicheskogo universiteta, Tomsk, 2010, 291 pp. (in Russ.)

[17] V. Veber, V. Dilman, A. Veber, “Ongoing Control of Technological Processes for Thickness Measurement Tasks Using Eddy-Current Testing Technique”, Proc. 2018 International Russian Automation Conference (RusAutoCon) https://ieeexplore.ieee.org/abstract/document/8501607 | DOI

[18] T. E. Capobianco, J. D. Splett, H. K. Iyer, “Eddy Current Probe Sensitivity as a Function of Coil Constuction Parametrs”, Reseach in Nondestructive Evaluation, 2:3 (1990), 169–186 | DOI | MR

[19] V. N. Uchanin, “Invariant Estimation of the Efficiency of EddyCurrent Winding for the Development of New Converters and Control Techniques”, Proc. 7th National Conference “Non-Destructive Testing and Technical Diagnostics UkrNTD-2012”, UT NKTD Publ., Kiev, 2012, 66–71 (in Russ.)