On the choice of equivalent stress for the problem of mechanochemical corrosion of spherical members

O. S. Sedova ; Yu. G. Pronina

Vestnik Sankt-Peterburgskogo universiteta. Prikladnaâ matematika, informatika, processy upravleniâ, no. 2 (2016), pp. 33-44

Résumé

This paper compares two models of double-sided mechanochemical wear of thick spherical members subjected to inner and outer pressure. The corrosion rates on the inner and outer surfaces of the sphere are supposed to be linear functions of the corresponding equivalent stress. The possible inhibition of the corrosion process is taken into account. One of the models compared uses the von Mises stress as the equivalent stress while another model uses the maximum principal stress as the equivalent stress. The effect of hydrostatic pressure on the durability of the sphere is investigated. It is shown that, unlike the first model, the second one reflects the effect of hydrostatic pressure. Within the model using the maximum principal stress, the durability may be considerably smaller or larger, depending on the sign of the difference between the inner and outer pressure. It is demonstrated that when the inhibition constant is not equal to zero, the difference between the durability calculated by the use of one model and the durability calculated by the use of another may reach hundreds percent. It is shown that for high-pressure vessels in the conditions of corrosion the maximum principal stress model is more appropriate then the von Mises stress model. Refs 30. Figs 3.

Détail

Keywords: mechanochemical corrosion, general corrosion, high-pressure vessels, thick-walled sphere, hydrostatic pressure.

Bibliographie

[1] Gutman E. M., Mechanochemistry of solid surfaces, World Scientific, Singapore, 1994, 325 pp.

[2] Dolinskiy V. M., “Calculations on loaded tubes exposed to corrosion”, Chemical and Petroleum Engineering, 1967, no. 2, 9–10 (In Russian)

[3] Pavlov P. A., Kadyrbekov B. A., Kolesnikov V. A., Strength of Steels in Corrosive Environments, Nauka Publ., Alma-Ata, 1987, 272 pp. (In Russian)

[4] Naumova G. A., Ovchinnikov I. G., Strength Calculations of Compound Frameworks and Pipeline Structures with Taking into Account Corrosion Damages, Saratov. State Tech. University Publ., Saratov, 2000, 227 pp. (In Russian)

[5] Bergman R. M., Levitsky S. P., Haddad J., Gutman E. M., “Stability loss of thin-walled cylindrical tubes, subjected to longitudinal compressive forces and external corrosion”, Thin-Walled Structures, 44:7 (2006), 726–729 | DOI

[6] Rusanov A. I., “Mechanochemistry of dissolution: kinetic aspect”, Russian Journal of General Chemistry, 77:4 (2007), 529–542 (In Russian)

[7] Ovchinnikov I. I., Ovchinnikov I. G., Zanin A. A., Zelentsov D. G., Korotkaya L. I., “Problem of optimum design of the loaded constructions which are exposed to influence of aggressive environments (review)”, On-line Journal Naukovedenie, 2012, no. 4 (13), 97 (In Russian)

[8] Elishakoff I., Ghyselinck G., Miglis Y., “Durability of an elastic bar under tension with linear or nonlinear relationship between corrosion rate and stress”, Journal of Applied Mechanics, Trans. ASME, 79:2 (2012), 021013 | DOI

[9] Lokoshchenko A. M., Sokolov A. V., “Creep and long-time fracture of a cylindrical shell under external pressure in the presence of an aggressive medium”, Proc. of the Russian Academy of science. Mechanics of Solids, 2014, no. 1, 65–76 (In Russian)

[10] Pronina Yu. G., “Mechanochemical corrosion of an ideal elasto-plastic quill cylinder under the constant pressure”, Vestnik of Saint Petersburg University. Series 1. Mathematics. Mechanics. Astronomy, 2006, no. 3, 121–130 (In Russian)

[11] Pronina Yu. G., “Equal mechanochemical corrosion of an ideal elasto-plastic hollow sphere under constant pressure”, Vestnik of Saint Petersburg University. Series 1. Mathematics. Mechanics. Astronomy, 2009, no. 1, 113–122 (In Russian)

[12] Pronina Y. G., “Thermoelastic stress analysis for a tube under general mechanochemical corrosion conditions”, Proceedings of the 4th Intern. Conference on Computational Methods for Coupled Problems in Science and Engineering, COUPLED PROBLEMS-2011, 2011, 1408–1415

[13] Sedova O. S., Pronina Y. G., “Taking account of hydrostatic pressure in the modeling of corrosion of thick spherical shells”, Intern. Conference on Mechanics — Seventh Polyakhovs Reading (2015), 7106771

[14] Tanchenko A. Yu., Litvinenko A. V., Chepurnoy A. D., Kostenko Yu. V., Tkachuk N. A., “Metod pryamogo konechnogo vozmushcheniya chislennykh modeley pri issledovanii dinamicheskikh, zhestkostnykh i prochnostnykh kharakteristik tonkostennykh elementov mashinostroitel'nykh konstruktsiy”, Vestnik of Bryansk State Technical University, 2014, no. 4 (44), 114–124 (In Russian)

[15] Tkachuk N. N., Chepurnoy A. D., Skripchenko N. B., Litvinenko A. V., Tkachuk N. A., “Multilevel Models Applied for the Analysis of the Contact Interaction of Geometrically-Complex Bodies: Algorithms, Implementation and Applicability Analysis (final part)”, Forging and Stamping Production. Material Working by Pressure, 2014, no. 8, 6–8 (In Russian)

[16] Sedova O. S., Pronina Y. G., “Generalization of the Lame problem for three-stage decelerated corrosion process of an elastic hollow sphere”, Mechanics Research Communications, 65 (2015), 30–34 | DOI

[17] Yang Y., Zhang T., Shao Y., Meng G., Wang F., “New understanding of the effect of hydrostatic pressure on the corrosion of Ni–Cr–Mo–V high strength steel”, Corrosion Science, 73 (2013), 250–261 | DOI

[18] Gasratova N. A., Shamina V. A., “On a certain approach for solving the axisymmetric problem of linear elasticity theory”, Vestnik of Saint Petersburg University. Series 1. Mathematics. Mechanics. Astronomy, 2007, no. 2, 101–106 (In Russian)

[19] Voronkova E. B., Eriksson A., Bauer S. M., “Nonclassical theories of shells in application to soft biological tissues”, Advanced Structured Materials, 15 (2011), 647–654 | DOI

[20] Gasratova N. A., “Solution of Some Classic Three-Dimensional Problems of Elasticity Theory”, Young Scientist, 2014, no. 3 (62), 1–6 (In Russian) | MR

[21] Zhukova I. V., Kolpak E. P., “Mathematical models of malignant tumour”, Vestnik of Saint Petersburg University. Series 10. Applied mathematics. Computer science. Control processes, 2014, no. 3, 5–18 (In Russian)

[22] Mal'kov V. M., Kabrits S. A., Mansurova S. E., “Mathematic modeling of nonlinear deformation elastomeric layer”, Vestnik of Saint Petersburg University. Series 10. Applied mathematics. Computer science. Control processes, 2011, no. 3, 56–63 (In Russian)

[23] Kabrits S. A., Shamina V. A., “Bending shell of revolution by transverse force and moment”, Vestnik of Saint Petersburg University. Series 1. Mathematics. Mechanics. Astronomy, 2014, no. 2, 261–270 (In Russian) | MR

[24] Kolpak E. P., Mal'tseva L. S., “Large Deformation Rubber Membrane”, Young Scientist, 2014, no. 16, 78–84 (In Russian)

[25] Kolpak E. P., Mal'tseva L. S., “Circle flat membrane for large deformations”, Scientific and Practical Journal Volga Scientific Bulletin, 2014, no. 11-1 (39), 5–10 (In Russian)

[26] Grekov M. A., Kostyrko S. A., “A film coating on a rough surface of an elastic body”, Applied Mathematics and Mecanics, 77:1 (2013), 113–128 (In Russian) | MR | Zbl

[27] Mal'kov V. M., Mal'kova Yu. V., Stepanova V. A., “Bi-material plane of John's material with interface crack loaded by pressure”, Vestnik of Saint Petersburg University. Series 1. Mathematics. Mechanics. Astronomy, 2013, no. 3, 113–125 (In Russian)

[28] Sedova O. S., “Stress distribution in the neighborhood of a corrosion pit on the outer surface of an elastic spherical shell”, 2nd Intern. Conference on Emission Electronics (ICEE). Selected papers. Proceedings, eds. N. V. Egorov, D. A. Ovsyannikov, E. I. Veremey, Saint Petersburg State University, Saint Petersburg, 2014, 78–81

[29] Pavlovskiy V. A., Chistov A. L., “Modelling of real gas tank fill-up dynamics”, Vestnik of Saint Petersburg University. Series 10. Applied mathematics. Computer science. Control processes, 2014, no. 3, 46–57 (In Russian)

[30] Pavlovsky V. A., Chistov A. L., “Computation parameters of cargo reservoir fill-up process on cng-vessels in MATLAB”, Intern. Conference on computer technologies in physical and engineering applications (ICCTPEA), ed. E. I. Veremey, Saint Petersburg State University, Saint Petersburg; IEEE (IEEE Catalog number CFP14BDA-USB), 2014, 136