On the boundary conditions for a thin circular plate conjugated to a massive body

K. B. Ustinov   ; D. V. Gandilyan

Vestnik Samarskogo universiteta. Estestvennonaučnaâ seriâ, Tome 30 (2024) no. 1, pp. 50-63

Résumé

The problem of deformation under the action of uniform pressure of a circular plate coupled with a massive base is considered, while the condition for the coupling of the plate with the base is modeled using boundary conditions of the generalized elastic embedding type, i.e. the relationship between the bending moment and forces at the edge of the plate with displacements and rotation angles through the compliance matrix. The main goal of the work is to study the influence of the elasticity of the embedding on the elastic response of the plate. The solution to the problem was obtained in the formulation of the linear theory of plates, the theory of membranes in the approximation of homogeneity of longitudinal forces, and the Foppl — von Karman theory, also in the approximation of the assumption of homogeneity of longitudinal forces. The values of the coefficients of the compliance matrix were obtained using the finite element method for the auxiliary problem and compared with the values of the coefficients obtained for related problems by analytical methods. Numerical results were obtained for an aluminum wafer on a silicon base. The obtained solution was compared with the solution obtained for the rigid embedment condition for all three models used. It is shown that in the case of large deflections (several plate thicknesses), taking into account the compliance of the embedment becomes essential.

Détail

Keywords: thin plate, boundary conditions for plates, elastic embedding
Mots-clés : compliance matrix.

Bibliographie

[1] Cotterell B., Chen Z., “Buckling and cracking of thin film on compliant substrates under compression”, International Journal of Fracture, 104:2 (2000), 169–179 | DOI

[2] Yu H.-H., Hutchinson J.W., “Influence of substrate compliance on buckling delamination of thin films”, International Journal of Fracture, 113 (2002), 39–55 | DOI

[3] Li S., Wang J., Thouless M.D., “The effects of shear on delamination in layered materials”, Journal of the Mechancics and Physics of Solids, 52:1 (2004), 193–214 | DOI | Zbl

[4] Andrews M., Massabo R., Cox B., “Elastic interaction of multiple delaminations in plates subject to cylindrical bending”, International Journal of Solids and Structures, 43:5 (2006), 855–886 | DOI | Zbl

[5] Andrews M., Massabo R., “The effects of shear and near tip deformations on energy release rate and mode mixity of edge-cracked orthotropic layers”, Engineering Fracture Mechanics, 74:17 (2007), 2700–2720 | DOI

[6] Ustinov K.B., “On shear separation of a thin strip from the half-plane”, Mechanics of Solids, 49:6 (2014), 713–724 | DOI

[7] Ustinov K.B., “On separation of a layer from the half-plane: elastic fixation conditions for a plate equivalent to the layer”, Mechanics of Solids, 50:1 (2015), 62–80 | DOI

[8] Begley M.R., Hutchinson J.W., The Mechanics and Reliability of Films, Multilayers and Coatings, Cambridge University Press, Cambridge, 2017, 288 pp. | DOI

[9] Thouless M.D., “Shear forces, root rotations, phase angles and delamination of layered materials”, Engineering Fracture Mechanics, 191 (2018), 153–167 | DOI

[10] Barbieri L., Massabo R., Berggreen C., “The effects of shear and near tip deformations on interface fracture of symmetric sandwich beams”, Engineering Fracture Mechanics, 201 (2018), 298–321 | DOI

[11] Massabo R., Ustinov K.B., Barbieri L., Berggreen C., “Fracture mechanics solutions for interfacial cracks between compressible thin layers and substrates”, Coatings, 9:3 (2019), 152 | DOI

[12] Ustinov K.B., “On semi-infinite interface crack in bi-material elastic layer”, European Journal of Mechanics – A/Solids, 75 (2019), 56–69 | DOI | MR | Zbl

[13] Monetto I., Massabo R., “An analytical beam model for the evaluation of crack tip root rotations and displacements in orthotropic specimens”, Frattura ed Integrita Strutturale, 14:53 (2020), 372–393 | DOI

[14] Ustinov K., Massabo R., “On elastic clamping boundary conditions in plate models describing detaching bilayers”, International Journal of Solids and Structures, 248 (2022), 111600 | DOI

[15] Ustinov K.B., “On influence of substrate compliance on delamination and buckling of coatings”, Engineering Failure Analysis, 47 (2015), 338–344 | DOI

[16] Volmir A.S., Stability of deformable systems, Nauka, M., 1967, 984 pp. (In Russ.)

[17] Bauer S.M., Voronkova E.B., “Influence of boundary constraints on the appearance of asymmetrical equilibrium states in circular plates under normal pressure”, Journal of the Belarusian State University. Mathematics and Informatics, 2020, no. 1, 38–46 (In Russ.) | DOI

[18] Vogt F., Uber die Berechnung der Fundamentdeformation Avhandlinger utgitt av det Norske Videnskaps, Akademi i Oslo, Matematisk-naturvidenskapelig klasse, 1925, 35 pp.

[19] Weber C., The Deformation of Loaded Gears and the Effect on Their Load Carrying Capacity, Department of Scientific and Industrial Research, Sponsored Research, Germany. Report 3, Part I, England, 1949

[20] O'Donnell W.J., “The additional deflection of a cantilever due to the elasticity of the support”, Journal of the Applied Mechanics, 27:3 (1960), 461–464 | DOI

[21] O'Donnell W.J., “Stresses and Deflection in Built-Up Beams.”, Journal of Engineering for Industry, 85:3 (1963), 265–273 | DOI

[22] Brown J.M., Hall A.S., “Bending Deflection of a Circular Shaft Terminating in a Semi-Infinite Body”, Journal of Applied Mechanics, 29:1 (1962), 86–90 | DOI | Zbl

[23] Small N.C., “Bending of a Cantilever Plate Supported From an Elastic Half Space”, Journal of Applied Mechanics, 28 (1961), 387–394 | DOI | MR | Zbl

[24] Jose Maria De Teresa (ed.), Nanofabrication: Nanolithography techniques and their applications, IOP Publishing Ltd, Bristol, England, 2020, 450 pp. | DOI

[25] Salashchenko N.N., Chkhalo N.I., Dyuzhev N.A., “Maskless X-Ray Lithography Based on Moems and Microfocus X-Ray Tubes”, Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques, 2018, no. 10, 10–20 (In Russ.) | DOI

[26] Silverman J.P., “Challenges and progress in X-ray lithography”, Journal of Vacuum Science Technology B, 16:6 (1998), 31–37 | DOI

[27] Vladimirsky Y., Bourdillon A., et al., “Demagnification in proximity X-ray lithography and extensibility to 25 nm by optimizing Fresnel diffraction”, Journal of Physics D: Applied Physics, 32:22 (1999), 114–118 | DOI

[28] Cheng Y.L., Li M.L., Lin J.H., Lai J.H, Ke C.T., and Huang Y.C., “Development of dynamic mask photolithography system”, Proceedings of the IEEE International Conference on Mechatronics, ICM'05, 2005, 467–471 | DOI

[29] Lychev S.A., Digilov A.V., Pivovarov N.A., “Bending of a circular disk: from cylinder to ultrathin membrane”, Vestnik Samarskogo universiteta. Estestvennonauchnaya seriya / Vestnik of Samara University. Natural Science Series, 29:4 (2023), 77–105 (In Russ.) | DOI | MR

[30] Timoshenko S.P., Woinowsky-Krieger S., Theory of plates and shells, Gosudarstvennoe izdatel'stvo fiziko-matematicheskoi literatury, M., 1963, 635 pp. (in Russian)

[31] Anuriev V.I., Handbook of mechanical engineering designer, in 3 vols, v. 1, 8th edition, revised and enlarged, ed. Zhestkova I.N., Mashinostroenie, M., 2001, 34 pp. (In Russ.)