Influence of the higher order terms in Williams’ series expansion of the stress field on the stress-strain state in the vicinity of the crack tip. Part I

L. V. Stepanova

Vestnik Samarskogo universiteta. Estestvennonaučnaâ seriâ, Tome 25 (2019) no. 1, pp. 63-79

Résumé

The paper is devoted to the multi-parameter description of the stress fields in the vicinity of two collinear crack of different length in an infinite isotropic elastic medium subjected to 1) Mode I loading; 2) Mode II loading; 3) mixed (Mode I + Mode II) mode loading. The multi-parameter asymptotic expansions of the stress field in the vicinity of the crack tip in isotropic linear elastic media under mixed mode loading are obtained. The amplitude coefficients of the multi-parameter series expansion are found in the closed form. Having obtained the coefficients of the Williams series expansion one can keep any preassigned number of terms in the asymptotic series. Asymptotic analysis of number of the terms in the Williams asymptotic series which is necessary to keep in the asymptotic series at different distances from the crack tip. It is shown that the more distance from the crack tip the more terms in the Williams asymptotic expansion need to be kept.

Détail

Keywords: stress-strain state at the crack tip, multiparameter description of stress field at the crack tip, mixed deformation, stress intensity factor, T-stress, higher approximation coefficients, methods of asymptotic analysis and synthesis in deformable solid mechanics, perturbation theory.

Bibliographie

[1] N. I. Mushelishvili, Some basic problems of the mathematical theory of elasticity, Science, M., 1966, 707 pp. | MR

[2] M. L. Williams, “On the stress distribution at the base of a stationary crack”, Trans. ASME. Journal of Applied Mechanics, 24 (1957), 109–114 | MR | Zbl

[3] G. Hello, M. B. Tahar, J. M. Roelandt, “Analytical determination of coefficients in crack-tip stress expansions for a finite crack in an infinite plane medium”, International Journal of Solids and Structures, 49 (2012), 556–566

[4] E. M. Adulina, L. V. Stepanova, “On development of multiscale fracture models”, Vestnik of Samara State University, 2012, no. 9(100), 70–83 | Zbl

[5] G. Hello, “Derivation of complete crack-tip stress expansions from Westergaard-Sanford solutions”, International Journal of Solids and Structures, 144–145 (2018), 265–275

[6] F. Zhu et al., “On the stress singularity at crack tip in elasticity”, Results in Physics, 13 (2019), 102210

[7] O. Krepl, J. Klusak, “Multi-parameter average strain energy density factor criterion applied on the sharp material inclusion problem”, Procedia Structural Integrity, 13 (2018), 1279–1284

[8] M. Moazzami, M. R. Ayatollahi, H. R. Chamani, L. Guagliano Vergani, “Determination of higher order stress terms in cracked Brazilian disc specimen under mode I loading using digital image correlation technique”, Optic and Laser Technology, 107 (2018), 344–352

[9] B. L. Karihaloo, Q. Z. Xiao, “Asymptotic crack tip fields in linear and nonlinear materials and their role in crack propagation”, Physical Mesomechanics, 22 (2019), 18–31 | DOI

[10] F. Berto, P. Lazzarin, “Recent developments in brittle and quasi-brittle failure assessment of engineering materials by means of local approaches ”, Materials Science and Engineering R, 75 (2014), 1–48

[11] G. C. Sih, “A Special Theory of Crack Propagation: Methods of Analysis and Solutions of Crack Problems”, Mechanics of Fracture, Noordhoff International Publishing, Leiden, 1973, 21–45 | MR

[12] L. V. Stepanova, S. A. Igonin, “Rabotnov damageparameter and description of delayed fracture: Results, current status, application to fracture mechanics, and prospects”, Journal of Applied Mechanics and Technical Physics, 56:2 (2015), 282–292 | MR | Zbl

[13] L. Malikova, “Multi-parameter fracture criteria for the estimation of crack propagation direction applied to a mixed-mode geometry”, Engineering Fracture Mechanics, 143 (2015), 32–46

[14] L. Malikova, V. Vesely, S. Seitl, “Crack propagation direction in a mixed mode geometry estimated via multi-parameter fracture criteria”, International Journal of Fatigue, 89 (2016), 99–107

[15] L. V. Stepanova, “Asymptotics of stresses and strain rates near the tip of a transverse shear crack in a material whose behavior is described by a fractional-linear law”, Journal of Applied Mechanics and Technical Physics, 50:1 (2009), 137–146 | Zbl

[16] L. V. Stepanova, P. S. Roslyakov, “Multi-parameter description of the crack-tip stress field: Analytic determination of coefficients of crack-tip stress expansions in the vicinity of the crack tips of two finite cracks in an infinite plane medium”, International Journal of Solids and Structures, 100–101 (2016), 11–28

[17] V. Vesely, J. Sobek, S. Seitl, “Multi-parameter approximation of the stress field in a cracked body in the more distant surrounding of the crack tip”, International Journal of Fatigue, 89 (2016), 20–35

[18] L. V. Stepanova, E. M. Adylina, “Stress-strain state in the vicinity of a crack tip under mixed loading”, Journal of Applied Mechanics and Technical Physics, 55:5 (2014), 885–895 | MR | Zbl

[19] L. V. Stepanova, E. M. Yakovleva, “Asymptotic stress field in the vicinity of a mixed-mode crack under plane stress conditions for a power-law hardening material”, Journal of Mechanics of Materials and Structures, 10:3 (2015), 367–393 | MR

[20] J. Sobek, P. Frantik, V. Vesely, “Analysis of accuracy of Williams series approximation of stress field in cracked body — influence of area of interest around crack-tip on multi-parameter regression performance”, Frattura ed Integrita Strutturale, 39:1 (2017), 129–142

[21] K. V. N. Surendra, K. R. Y. Simha, “Design and analysis of novel compression fracture specimen with constant form factor: Edge cracked semicircular disk (ECSD)”, Engineering Fracture Mechanics, 102 (2013), 235–248

[22] J. Akbardoost, A. Rastin, “Comprehensive data for calculating the higher order terms of crack tip stress field in disk-type specimens under mixed mode loading”, Theoretical and Applied Fracture Mechanics, 76 (2015), 75–90

[23] S. I. Eleonskj, I. N. Odintsve, V. S. Pisarev, A. V. Chernov, “Study of the crack propagation process using measements of strain field. I. Stress field”, TSAGI Science Journal, 46:7 (2015), 55–80

[24] M. Mokhtarishirazabad et al., “Evaluation of crack-tip fields from DIC data: A parameter study”, International Journal of Fatigue, 89 (2016), 11–19

[25] O. Lychak, I. Holyns'kiy, “Improving the accuracy of derivation of the Williams' series parameters under mixed (I+II) mode loading by compensation of measurement bias in the stress field components data”, Measurement Science and Technology, 27:12 (2016), 125203

[26] M. R. Ayatollahi, M. Moazzami, “Digital image correlation method for calculating coefficients of Williams expansion in compact tension”, Optic and Lasers in Engineering, 90 (2017), 26–33

[27] A. S. Chernyatin, Yu. G. Matvienko, P. Lopez-Crespo, “Mathematical and numerical correction of the DIC displacements for determination of stress field along crack front”, Procedia Structural Integrity, 2 (2016), 2650–2658

[28] L. Malikova, V. Vesely, “Estimation of the crack propagation direction in a mixed-mode geometry via multi-parameter fracture criteria ”, Frattura ed Integrita Strutturale, 33 (2015), 25–32

[29] Prataprao Patil, C. P. Vyasarayani, M. Ramji, “Linear least square approach for evaluating crack tip fracture parameters using isochromatic and isoclinic data from digital photoelasticity”, Optics and Lasers in Engineering, 93 (2017), 182–194

[30] A. Vivekanandan, K. Ramesh, “Study of interaction effects of asymmetric cracks under biaxial loading using digital photoelasticity”, Theoretical and applied Fracture Mechanics, 99 (2019), 104–117

[31] M. Kachanov, B. Shafiro, I. Tsurkov, Handbook of Elasticity Solutions, Springer-Science+Business Media, Dordrecht, 2003, 329 pp. | MR

[32] H. Tada, P. C. Paris, G. R. Irwin, The stress analysis of cracks handbook, ASME Press, New York, 2000, 696 pp.