Mathematical modeling of the dynamic deformation of a rod-strip fixed on a double-sided support element through elastic interlayers

V. N. Paimushin   ; V. M. Shishkin   ; S. F. Chumakova

Učënye zapiski Kazanskogo universiteta. Seriâ Fiziko-matematičeskie nauki, Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki, Tome 166 (2024) no. 3, pp. 407-425

Résumé

The simplest transformation model of the dynamic deformation along the length of a rod-strip consisting of two segments was constructed. The model is based on the classical geometrically linear Kirchhoff–Love model for the unfixed segment, while the fixed segment of finite length is assumed to be connected to a rigid and immovable support element through elastic interlayers. On the fixed segment, the deflections of the rod and interlayers were considered zero. For axial displacements within the thicknesses of the rod and interlayers, approximations were adopted according to S.P. Timoshenko’s shear model, subject to the conditions of continuity at the points where they connect to each other and immobility at the points where the interlayers connect to the support element. The conditions for kinematic coupling of the unfixed and fixed segments of the rod were formulated. Taking them into account and using the D’Alembert–Lagrange variational principle, the equations of motion and boundary conditions for the considered segments were derived, and the conditions for force coupling of the segments were obtained. With the help of the derived equations, exact analytical solutions of the problems of free and forced harmonic vibrations of the rod of the studied type were found. These solutions were employed in the numerical experiments to determine the natural modes and frequencies of bending vibrations, as well as the dynamic response during the resonant vibrations of the rod-strip made of a unidirectional fibrous composite based on ELUR-P carbon tape and XT-118 binder. The findings show a significant transformation of transverse shear stresses when passing through the boundary from the unfixed segment of the rod to the fixed one, as well as their pronounced localization in the region of the fixed segment near this boundary.

Détail

Mots-clés : vibrations
Keywords: rod-strip, S.P. Timoshenko's model, unfixed segment, fixed segment, equation of motion, kinematic conditions for coupling of segments, force conditions for coupling of segments, analytical solutions.

Bibliographie

[1] Algazin S.D., Selivanov I.A., “Natural vibration of a rectangular plate with mixed boundary conditions”, J. Appl. Mech. Tech. Phys., 62:2 (2021), 238–244 | DOI

[2] Algarray A.F.A., Jun H., Mahdi I.-E.M., “Effects of end conditions of cross-ply laminated composite beams on their dimensionless natural frequencies”, J. Appl. Mech. Tech. Phys., 58:6 (2017), 1108–1114 | DOI

[3] Krylova E.Yu., Papkova I.V., Erofeev N.P., Zakharov V.M., Krys'ko V.A., “Complex fluctuations of flexible plates under longitudinal loads with account for white noise”, J. Appl. Mech. Tech. Phys., 57:4 (2016), 714–719 | DOI

[4] Tüfekci M., Dear J.P., Salles L., “Forced vibration analysis of beams with frictional clamps”, Appl. Math. Modell., 128 (2024), 450–469 | DOI

[5] Banks H.T., Inman D.J., “On damping mechanisms in beams”, J. Appl. Mech., 58:3 (1991), 716–723 | DOI

[6] Asadi K., Ahmadian H., Jalali H., “Micro/macro-slip damping in beams with frictional contact interface”, J. Sound Vib., 331:2 (2012), 4704–4712 | DOI

[7] Ferri A.A., Bindemann A.C., “Damping and vibrations of beams with various types of frictional support conditions”, J. Vib. Acoust., 114:3 (1992), 289–296 | DOI

[8] Paimushin V.N., Shishkin V.M., “Deformation of thin-walled structural elements having fixed areas of finite dimensions on the boundary front surfaces”, J. Appl. Mech. Tech. Phys., 64:2 (2023), 308–324 | DOI

[9] Paimushin V.N., Shishkin V.M., “Refined model of dynamic deformation of a flat rod with a finite-length fixed region on an outer surface”, J. Appl. Mech. Tech. Phys., 65:1 (2024), 161–175 | DOI

[10] Paimushin V.N., Firsov V.A., Shishkin V.M., Gazizullin R.K., “Transformational deformation models of continuous thin-walled structural elements with support elements of finite sizes: Theoretical foundations, computational, and physical experiments”, Z. Angew. Math. Mech., 104:2 (2024), e202300214 | DOI

[11] Yankovskii A.P., “Critical analysis of the equations of statics in the bending theories of composite plates obtained on the basis of variational principles of elasticity theory. 1. General theories of high order”, Mech. Compos. Mater., 56:3 (2020), 271–290 | DOI

[12] Yankovskii A.P., “Critical analysis of the equations of statics in the bending theories of composite plates obtained on the basis of variational principles of elasticity theory. 2. Particular low-order theories”, Mech. Compos. Mater., 56:4 (2020), 437–454 | DOI

[13] Paimushin V.N., Firsov V.A., Glass Shells. Calculation of the Stress-Strain State, Mashinostroenie, M., 1993, 208 pp. (In Russian)

[14] Paimushin V.N., Shishkin V.M., “Transformational model of a plane rod deformation, restrained on double-sided sliding supports”, Probl. Prochn. Plast., 86:2 (2024), 437–454 (In Russian) | DOI

[15] Norrie D.H., de Vries G., An Introduction to Finite Element Analysis, Acad. Press, New York, NY–San Francisko, CA–London, 1978, 314 pp.

[16] Zienkiewiez O.C., The Finite Element Method in Engineering Science, ed. Morice P.B., McGraw-Hill, London, 1971, xiv+521 pp.

[17] Tseitlin A.I., “On considering internal friction in the normative documents for the dynamic design of structures”, Stroit. Mekh. Rascheta Sooruzh., 1981, no. 4, 33–38 (In Russian)

[18] Sorokin E.S., On the Theory of Internal Friction during Vibrations of Elastic Systems, Gosstroiizdat, M., 1960, 131 pp. (In Russian)

[19] Vasilenko N.V., “Considering the imperfect elasticity of materials in mechanical vibrations using the complex modulus method”, Energy Dissipation in Vibrations of Elastic Systems, Nauk. Dumka, Kyiv, 1974, 5–12 (In Russian)

[20] Rikards R.B., Barkanov E.N., “Determination of the dynamic characteristics of vibration-absorbing coating by the finite-element method”, Mech. Compos. Mater., 27:5 (1992), 529–534 | DOI

[21] Paimushin V.N., Kholmogorov S.A., “Physical-mechanical properties of a fiber-reinforced composite based on an ELUR-P carbon tape and XT-118 binder”, Mech. Compos. Mater., 54:1 (2018), 2–12 | DOI

[22] Shoup T.E., A Practical Guide to Computer Methods for Engineers, Prentice Hall, Englewood Cliffs, NJ, 1979, 255 pp.

[23] Khazanov Kh.S., Mechanical Vibrations of Systems with Distributed Parameters, SGAU, Samara, 2002, 82 pp. (In Russian)