Experimental and theoretical study on the failure of sandwich specimens with tabs under four-point bending

V. N. Paimushin   ; S. A. Kholmogorov   ; M. V. Makarov   ; N. V. Levshonkova

Učënye zapiski Kazanskogo universiteta. Seriâ Fiziko-matematičeskie nauki, Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki, Tome 166 (2024) no. 2, pp. 200-219

Résumé

The problem of testing sandwich specimens with composite facing layers and a transversally soft core for four-point bending was formulated. The localized external load from the loading rollers to the facing layer of the specimen was assumed to be transmitted through composite tabs, which reduced the stress concentration in the compressed facing layer. The external facing layers and tabs were analyzed for deformation mechanics using S.P. Timoshenko’s kinematic model. The model considered compression in the facing layers but not in the tabs. The core was classified as transversally soft with zero tangential stresses. The tabs were connected to the facing layers through adhesive interlayers, and the displacement vectors of the front surfaces of the tabs were coupled kinematically with the displacement vectors of the front surfaces of the facing layers. The relationships between the transverse shear stresses and strain in the facing layers were assumed to be physically nonlinear, with the shear modulus being a function of the shear strain. Using the generalized variational principle of virtual displacements, a system of nonlinear differential equilibrium equations for the facing layers and tabs was derived. The system was closed by three more equations, which were the conditions for the kinematic coupling of the facing layers with the core based on tangential displacements. To numerically solve the formulated problem, the finite sum method, also known as the method of integrating matrices, was employed. This method involved reducing the original boundary value problem to integro-algebraic equations with Volterra-type operators of the second kind and additional relations for determining the unknown integration constants. The algorithm of the developed method was implemented as an application software, which facilitated a series of computational experiments. The results obtained were compared with the experimental data on the four-point bending of sandwich specimens with the facing layers made of a unidirectional fiber-reinforced composite characterized by specific geometric and physico-mechanical properties, as well as with tabs under the loading rollers. It was shown that the use of tabs significantly increases the ultimate compressive failure stresses in the facing layers.

Détail

Keywords: sandwich plate, specimen, four-point bending, fiber-reinforced composite, finite sum method, ultimate compressive stress, physical and geometric nonlinearity.

Bibliographie

[1] Petras A., Sutcliffe M.P.F., “Failure mode maps for honeycomb sandwich panels”, Compos. Struct., 44:4 (1999), 237–252 | DOI

[2] Rupp P., Elsner P., Weidenmann K.A., “Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process”, J. Sandwich Struct. Mater., 21:8 (2019), 2654–2679 | DOI

[3] Shi H., Liu W., Fang H., “Damage characteristics analysis of GFRP-Balsa sandwich beams under four-point fatigue bending”, Composites, Part A, 109 (2018), 564–577 | DOI

[4] Sokolinsky V.S., Shen H., Vaikhanski L., Nutt S.R., “Experimental and analytical study of nonlinear bending response of sandwich beams”, Compos. Struct., 60:2 (2003), 219–229 | DOI

[5] Banghai J., Zhibin L., Fangyun L., “Failure mechanisms of sandwich beams subjected to three-point bending”, Compos. Struct., 133 (2015), 739–745 | DOI

[6] Fathi A., Woff-Fabris F., Altstädt V., Gätzi R., “An investigation of the flexural properties of balsa and polymer foam core sandwich structures: Influence of core type and contour finishing options”, J. Sandwich Struct. Mater., 15:5 (2013), 487–508 | DOI

[7] Alila F., Fajoui J., Gerard R., Casari P., Kchaou M., Jacquemin F., “Viscoelastic behaviour investigation and new developed laboratory slamming test on foam core sandwich”, J. Sandwich Struct. Mater., 22:6 (2020), 2049–2074 | DOI

[8] Piovár S., Kormaníková E., “Sandwich beam in four-point bending test: Experiment and numerical models”, Adv. Mater. Res., 969 (2014), 316–319 | DOI

[9] Russo A., Zuccarello B., “Experimental and numerical evaluation of the mechanical behaviour of GFRP sandwich panels”, Compos. Struct., 81:4 (2007), 575–586 | DOI

[10] Crupi V., Epasto G., Guglielmino E., “Comparison of aluminium sandwiches for lightweight ship structures: Honeycomb vs. foam”, Mar. Struct., 30 (2013), 74–96 | DOI

[11] Paimushin V.N., Makarov M.V., Badriev I.B., Kholmogorov S.A., “Geometrically nonlinear strain and buckling analysis of sandwich plates and shells reinforced on their edge”, Shell Structures: Theory and Applications, SSTA 2017 (Oct. 11–13, 2017, Gdansk, Poland), v. 4, eds. Pietraszkiewicz W., Witkowski W., CRC Press/Balkema, Leiden, 2018, 267–270 | DOI

[12] Badriev I.B., Makarov M.V., Paimushin V.N., “Solvability of physically and geomentrically nonlinear problem of the theory of sandwich plates with transversally-soft core”, Russ. Math., 59:10 (2015), 57–60 | DOI

[13] Budiansky B., Fleck N. A., “Compressive failure of fibre composites”, J. Mech. Phys. Solids, 41:1 (1993), 183–211 | DOI

[14] Jumahat A., Soutis C., Jones F.R., Hodzic A., “Fracture mechanisms and failure analysis of carbon fibre/toughened epoxy composites subjected to compressive loading”, Compos. Struct., 92:2 (2010), 295–305 | DOI

[15] Paimushin V.N., Tarlakovskii D.V., Kholmogorov S.A., “On non-classical buckling mode and failure of composite laminated specimens under the three-point bending”, Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki, 158, no. 3, 2016, 350–375 (In Russian)

[16] Paimushin V.N., Kholmogorov S.A., Makarov M.V., Tarlakovskii D.V., Lukaszewicz A., “Mechanics of fiber composites: Forms of loss of stability and fracture of test specimens resulting from three-point bending tests”, Z. Angew. Math. Mech., 99:1 (2019), e201800063 | DOI

[17] Paimushin V.N., Makarov M.V., Kholmogorov S.A., Levshonkova N.V., “Refined equations of the theory of composite multilaeyred shells with transversally soft core under medium bending”, Lobachevskii J. Math., 44:7 (2023), 2845–2855 | DOI

[18] Galimov K.Z., Principles of the Nonlinear Theory of Thin Shells, Izd. Kazan. Univ., Kazan, 1975, 326 pp. (In Russian)

[19] Dautov R.Z., Paimushin V.N., “On the method of integrating matrices for the solution of boundary value problems for fourth-order ordinary equations”, Russ. Math., 40:10 (1996), 11–23

[20] Paimushin V.N., Kholmogorov S.A., “Physical-mechanical properties of a fiber-reinforced composite based on an ELUR-P carbon tape and XT-118 binder”, Mech. Compos. Mater., 54:1 (2018), 2–12 | DOI

[21] Kayumov R.A., Lukankin S.A., Paimushin V.N., Kholmogorov S.A., “Identification of mechanical properties of fiber-reinforced composites”, Uchenye Zapiski Kazanskogo Universiteta. Seriya Fiziko-Matematicheskie Nauki, 157, no. 4, 2015, 112–132 (In Russian)

[22] Badriev I.B., Banderov V.V., Makarov M.V., Paimushin V.N., “Determination of stress-strain state of geometrically nonlinear sandwich plate”, Appl. Math. Sci., 9:78 (2015), 3887–3895 | DOI

[23] Paimushin V.N., Kholmogorov S.A., Makarov M.V., “Numerical investigation of the stress-strain state of a layered composite specimen under three-point bending”, Proc. 2nd Int. Conf. "Deformation and Failure of Composite Materials and Structures, DFCMS-2016 (Oct. 18–20, 2016, Moscow), eds. Dumanskii A.M., Romanov A.N., Alimov M.A., Ruslantsev A.N., Stolitsa, M., 2016, 126–128 (In Russian)