The technique for determining the parameters of a contact for indenter with the orthotropic coating on the elastic isotropic substrate

V. V. Mozharovsky ; D. S. Kuzmenkov

Problemy fiziki, matematiki i tehniki, no. 4 (2016), pp. 74-81.

Résumé

The implementation of contact for indenter with the orthotropic coating on the elastic isotropic substrate is shown. Methods of determining the exposure parameters are built on the basis of the theory developed for calculating composite coatings. To investigate the influence of material properties and thickness of the coating on the contact parameters the program, on which the calculation was performed for different coating thickness, was written. Depending on the ratio of module of elasticity of the coating and base diagrams are constructed to determine the parameters of contact (contact area, pressure and values of the indentation). The convergence of numerical solutions depending on the thickness of the coatings and the relationship of material properties is studied.

Détail

Keywords: contact parameters, indenter, orthotropic coating
Mots-clés : composite.

Bibliographie

[1] S. A. Ryzhov, K. A. Ilin, A. N. Varyukhin, “Proektirovanie shin s ispolzovaniem programmnogo kompleksa ABAQUS”, SAPR i grafika, 2006, no. 1, 20–40

[2] V. V. Mozharovskii i dr., “Analiz kontaktnogo vzaimodeistviya avtomobilnoi shiny s kolesnym diskom i dorozhnym pokrytiem”, Doklady Belorusskogo kongressa mekhaniki, Sbornik nauchnykh trudov (Minsk, 2007), 135–142

[3] H. Wang, I. L. AlQadi, “Combined effect of moving wheel loading and three-dimensional contact stresses on perpetual pavement responses”, Transportation research record, 2095 (2009), 53–61 | DOI

[4] A. E. Giannakopoulos, S. Suresh, “Indentation of solids with gradients in elastic properties. II. Axisymmetric indentors”, Int. J. Solids Struct., 34 (1977), 2393–2428 | DOI

[5] C. Peijian, C. Shaohua, “Thermo-contact mechanics of rigid cylindrical stamps sliding on a finite graded-Layer”, Acta Mech., 223 (2012), 2647–2665 | DOI | MR | Zbl

[6] Caroline Bagault, Mechanical contact for layered anisotropic materials using a semi-analyticalmethod, NNT: 2013ISAL0014> PhD. THESIS-2013, Other. INSA de Lyon, 2013 (English) (Data dostupa: 01.06.2016) https://tel.archives-ouvertes.fr/tel-00940377/document

[7] V. V. Mozharovskii i dr., “Napryazhenno-deformirovannoe sostoyanie kompozitsionnykh pokrytii v tribologicheskikh sistemakh”, Trenie i iznos, 22:4 (2001), 379–385

[8] V. V. Mozharovskii, E. M. Berezovskaya, “Opredelenie napryazhenno-deformirovannogo sostoyaniya sloistykh neodnorodnykh tel”, Teoreticheskaya i prikladnaya mekhanika, 34, ed. N. I. Berezkina, Donetskii natsionalnyi universitet, Kharkov, 2001, 3–9

[9] P. K. Gupta, Zh. A. Valovit, E. F. Finkin, “Raspredelenie napryazhenii pri ploskoi deformatsii sloistogo uprugogo tela pod deistviem proizvolnoi granichnoi nagruzki”, Problemy treniya i smazki, 1973, no. 4, 61–67

[10] V. V. Mozharovskii, N. A. Rogacheva, “Napryazhennoe sostoyanie uprugogo ortotropnogo osnovaniya s odnorodnym pokrytiem s uchetom treniya”, Trenie i iznos, 20:5 (1999), 471–479

[11] Yu. M. Tarnopolskii, A. V. Roze, Osobennosti rascheta detalei iz armirovannykh plastikov, 2-e izd., pererab., Zinatne, Riga, 1969, 274 pp.

[12] S. G. Lekhnitskii, Teoriya uprugosti anizotropnogo tela, Nauka, M., 1977, 416 pp.

[13] Yu. M. Pleskachevsky, V. V. Mozharovsky, Yu. F. Rouba, “Mathematical models of quasi-static interaction between fibrous composite bodies”, Proc. Int. Conf. Computational methods in contact mechanics III (Madrid, July 3–5, 1997), Madrid, 1997, 363–372

[14] V. V. Mozharovskii, N. A. Marina, “Matematicheskoe modelirovanie nano-kontaktnogo vzaimodeistviya ortotropnykh tel”, Problemy fiziki, matematiki i tekhniki, 2010, no. 2(3), 47–53

[15] V. V. Mozharovskii, I. V. Smotrenko, “Matematicheskoe modelirovanie vzaimodeistviya tsilindricheskogo indentora s voloknistym kompozitsionnym materialom”, Trenie i iznos, 17:6 (1996), 24–32 | Zbl

[16] V. V. Mozharovskii, “Ploskie kontaktnye zadachi dlya anizotropnykh pokrytii s uchetom treniya”, Trenie i iznos, 1992, no. 5, 825–836

[17] S. A. Marin, V. V. Mozharovskii, “Napryazhenno-deformirovannoe sostoyanie sloistoi truby iz ortotropnykh materialov”, Materialy. Tekhnologii. Instrumenty, 9:3 (2004), 16–21

[18] V. V. Mozharovskii, V. E. Starzhinskii, Prikladnaya mekhanika sloistykh tel iz kompozitov, Nauka, Minsk, 1988, 280 pp.

[19] V. V. Mozharovskii, E. M. Berezovskaya, “O raschete napryazhennogo sostoyaniya pokrytii iz funktsionalno-gradientnykh i termochuvstvitelnykh materialov”, Izvestiya Gomelskogo gosudarstvennogo universiteta im. F. Skoriny, 2014, no. 3(84), 86–92

[20] V. V. Mozharovskii, D. S. Kuzmenkov, “Chislennaya realizatsiya metodiki po opredeleniyu napryazhenii i peremeschenii v ob'emnom tele primenitelno k tekhnicheskim prilozheniyam”, Izvestiya Gomelskogo gosudarstvennogo universiteta im. F. Skoriny, 2014, no. 6(87), 161–166

[21] V. V. Mozharovskii, N. A. Marina, D. S. Kuzmenkov, “Razrabotka inzhenernykh metodov rascheta sloistykh tribologicheskikh sistem iz kompozitsionnykh materialov s uchetom funktsionalno-gradientnykh i termochuvstvitelnykh svoistv”, Matematichni problemi mekhaniki neodnoridnikh struktur, Sbornik dokladov (Lvov, 15–19 veresnya 2014 g.), Institut prikladnykh problem mekhaniki i matematiki im. Ya. S. Pidstrigacha NAN Ukrainy, Lvov, 2014, 128–129

[22] V. V. Mozharovskii, D. S. Kuzmenkov, “Metodika, realizuyuschaya opredelenie napryazhenii i peremeschenii v ob'emnom tele pri zadannykh oblastyakh kontakta i deistvuyuschem davlenii”, Matematichni problemi mekhaniki neodnoridnikh struktur, sbornik dokladov (Lvov, 15–19 veresnya 2014 g.), Institut prikladnykh problem mekhaniki i matematiki im. Ya. S. Pidstrigacha NAN Ukrainy, Lvov, 2014, 68–70

[23] V. V. Mozharovskii, D. S. Kuzmenkov, “Raschet napryazhenno-deformirovannogo sostoyaniya ob'emnogo tela pri deistvuyuschem davlenii i pri zadannykh oblastyakh kontakta”, Matematicheskoe i imitatsionnoe modelirovanie sistem, Materialy konferentsii MODS ‘2014’ (Ukraina, Chernigov, s. Zhukin, 23–27 iyunya 2014 g.), Chernigov, 2014, 167–171

[24] V. V. Mozharovskii, E. M. Berezovskaya, T. M. Demova, “Raschet napryazhenno-deformirovannogo sostoyaniya pokrytii iz funktsionalno-gradientnykh i termochuvstvitelnykh materialov”, Matematicheskoe i imitatsionnoe modelirovanie sistem, Materialy konferentsii MODS ‘2014’ (Ukraina, Chernigov, s. Zhukin, 23–27 iyunya 2014 g.), Chernigov, 2014, 161–165

[25] V. V. Mozharovskii i dr., “Metodika rascheta napryazhennogo sostoyaniya sloistykh tribologicheskikh sistem iz kompozitsionnykh materialov s uchetom funktsionalno-gradientnykh i termochuvstvitelnykh svoistv”, Sovremennye problemy mashinovedeniya, Mashinovedenie-2014, Materialy Kh Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii (nauchnye chteniya, posvyaschennye P. O. Sukhomu) (Gomel, 23–24 oktyabrya, 2014 g.), Gomel, 2014, 63–64