Research of the influence of biological lubricants on the tribological properties of the steel - titanium alloy friction pair

A. A. Strelnikova ; A. D. Breki ; M. A. Skotnikova ; D. G. Plotnikov ; J. Padgurskas ; A. E. Gvozdev ; O. V. Kuzovleva

Čebyševskij sbornik, Tome 23 (2022) no. 2, pp. 191-200.

Résumé

The paper presents the results of a study of the influence of biological lubricants on the tribological properties of the friction pair "steel - titanium alloy". Tribological tests were carried out with indentation (scratching) on a friction path of 2 mm with an increase in load from 0.030 to 10 N on a Micro Indentation Tester CSM. The studies were carried out under various conditions: dry rubbing, with hyaluronic acid and with biological oil. It was found that lubricating media of biological origin create boundary lubricating layers on friction surfaces and are able to reduce wear due to microcutting. The development and experimental verification of a mathematical model expressing the dependence of the penetration depth on the friction path and other parameters has been implemented.

Détail

Keywords: biological lubricating media, titanium alloy, high-temperature deformation, tribological properties.

Bibliographie

[1] Kaya Tomoyuki, “Recent developments in Research, production and application of titanium in Japan”, Ti-2007 Science and technology, Proceedings of the 11th World conference on titanium (Kyoto, Japan, 2007), 2007, 49–56

[2] Hao Wang, “Overview and prospect of the world titanium emerging applications market”, Ti-2011 Science and technology, Proceedings of the 12th World conference on titanium (Beijing, China, 2011), 2011, 2227–2231

[3] Mitsuo Niinomi, “Recent trends in titanium research and development in Japan”, Ti-2011 Science and technology, Proceedings of the 12th World conference on titanium (Beijing, China, 2011), 2011, 30–37

[4] Mitsuo Niinomi, Kazuo Kagami, “Recent topics of titanium research and development in Japan”, Ti-2016 Science and technology, Proceedings of the 13th World conference on titanium (San Diego, USA, 2016), 2015, 27–40

[5] Jing Li, Jianzhong Zhou, Aixin Feng, Shu Huang, Xiankai Meng, Yunhui Sun, Yunjie Sun, Xuliang Tian and Yu Huang, “Investigation on mechanical properties and microstructural evolution of TC6 titanium alloy subjected to laser peening at cryogenic temperature”, Materials Science Engineering A, 734 (2018), 291–298 | DOI

[6] L.C. Zhou, Y.H. Li, W.F. He, G.Y. He, X.F. Nie, D.L. Chen, Z.L. Lai, Z.B. An, “Deforming TC6 titanium alloys at ultrahigh strain rates during multiple laser shock peening”, Materials Science Engineering A, 578 (2013), 181–186 | DOI

[7] R. Shi, Z.H. Nie, Q.B. Fan, F.C. Wang, Y. Zhou, X. Liu, “Correlation between dislocation-density-based strain hardening and microstructural evolution in dual phase TC6 titanium alloy”, Materials Science Engineering A, 715 (2018), 101–107 | DOI

[8] Nochovnaya N.A., Shiryaev A.A., “Vliyanie rezhimov termicheskoi obrabotki na mekhanicheskie svoistva i strukturu eksperimentalnoi kompozitsii vysokoprochnogo psevdo-$\beta$-titanovogo splava”, Trudy VIAM, 2018, no. 6 (66), 22–29

[9] Sokolov S.A., Plotnikov D.G., Grachev A.A., Lebedev V.A., “Evaluation of loads applied on engineering structures based on structural health monitoring data”, International Review of Mechanical Engineering, 14:2 (2020), 146–150 | MR

[10] Skotnikova M.A., Krylov N.A., Ivanova G.V., Tsvetkova A.A., “Structural and phase transformation in material of blades of steam turbines from titanium alloy after technological treatment”, Lecture Notes in Control and Information Sciences, 22, 2015, 93–101

[11] Shaboldo O.P., Vitorskii Y.M., Skotnikova M.A., “Formation of the structure and properties of $\beta$-type titanium alloy upon thermomechanical treatment”, Physics of Metals and Metallography, 18 (2017), 75–80 | DOI

[12] Skotnikova M.A., Ivanova G.V., Popov A.A., Paitova O.V., “Lokalizatsiya plasticheskoi deformatsii v GPU-kristallakh pri vdavlivanii i tsarapanii”, Sovremennoe mashinostroenie: Nauka i obrazovanie, materialy 6-i mezhdunarodnoi nauchno-prakticheskoi konferentsii, eds. A.N. Evgrafov, A.A. Popovich, Izd-vo Politekhn. un-ta, SPb., 2017, 402–412

[13] Skotnikova M.A., Ivanova G.V., Strelnikova A.A., “Macromechanism destruction of structurally and crystallographically textured titanium billets”, International Conference on Industrial Engineering, Springer, Cham, 2019, 1097–1105

[14] Skotnikova M.A., Strelnikova A.A., Ivanova G.V., Popov A.A., Syundyukov I.S., “Localization of plastic deformation in austenitic steel at low-temperature cycling loading”, Lecture Notes in Mechanical Engineering, 2020, 175–182 | DOI

[15] Skotnikova M.A., Krylov N.A., “About the Nature of Dissipative Processes in Cutting Treatments of Titanium Vanes”, Advances in Mechanical Engineering. Selected Contributions from the Conference “Modern Engineering: Science and Education” (Saint Petersburg, Russia, June 2016), Springer-Verlag, Berlin-Heidelberg, 2017, 115–124

[16] Cong Li, Like Qin, Ming Li, Hui Xiao, Qi Wang, Jian Chen, “Influence of deformation strain rate on the mechanical response in a metastable b titanium alloy with various microstructures”, Journal of Alloys and Compounds, 815 (2020)

[17] Belyi A.V., Kukareko V.A., Kononov A.G. i dr., Trenie i iznos, 29:6 (2008), 571–577

[18] Chertovskikh S. V., Tribotekhnicheskie kharakteristiki ultramelkozernistogo titana i ego splavov, avtoref. dis. ... kand. tekhn. nauk, M., 2008 | Zbl

[19] V.M. Savostikov, A.I. Potekaev, A.N. Tabachenko, E.F. Dudarev, I.A. Shulepov, “Fiziko-mekhanicheskie i tribologicheskie svoistva titanovykh splavov s gradientnym antifriktsionnym pokrytiem Ti-C-Mo-S”, Izvestiya vysshikh uchebnykh zavedenii. Fizika, 55:9 (2012), 71–77

[20] Breki A.D., Chulkin S.G., Gvozdev A.E., Kuzovleva O.V., “On the evolution of mathematical models of friction sliding of solids”, Chebyshevskii Sbornik, 21:4 (2020), 327–332 | DOI | MR | Zbl

[21] Breki A.D., Gvozdev A.E., Kuzovleva O.V., Kuzovlev V.Yu., “Empirical mathematical models of plasticity, strength and wear resistance of materials on the example of P18 steel”, Chebyshevskii Sbornikthis, 21:3 (2020), 272–291 | DOI | MR | Zbl

[22] Breki A.D., Chulkin S.G., Gvozdev A.E., Kolmakov A.G., “Mathematical Simulation of the Sliding Friction of Silicon Carbide in an Aqueous Medium”, Russian Metallurgy (Metally), 2021:4 (2021), 507–511 | DOI

[23] Breki A.D., Chulkin S.G., Gvozdev A.E., Kolmakov A.G., Kuzovleva O.V., “Empirical Mathematical Model for the Wear Kinetics of Porous Gas-Thermal Coatings”, Russian Metallurgy (Metally), 2021:4 (2021), 496–500 | DOI